PERMABOND® TA452
PERMABOND® TA452 is a low-odor 2-part, 1:1 toughened acrylic adhesive. It can be used to bond a wide variety of materials including metals, plastics, GRP, ceramics, wood and other substrates. It is convenient to use in an easy-to-dispense cartridge with mixing nozzle or can be applied bead-on-bead* without static mixer.
Product families
- Structural Adhesives
Other characteristics
- Brand
- PERMABOND
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Metal, Wood
- Markets
- Adhesives & Sealants
- Cure
- Air Dry
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Use Direction
Surfaces must be clean, dry and grease-free.; Apply a thin bead of adhesive pre-mixed through a static mixer nozzle.; Assemble components and clamp.; Maintain pressure until handling strength is achieved. The time required will vary according to the joint design and surfaces being bonded.; Allow 24 hours for adhesive to fully cure.
- Benefits and Features
- Excellent adhesion to metals
- Fast cure at room temperature
- Easy to dispense
- High shear and peel strength
- Low odor
- Low viscosity
- Non-flammable
- Storage Temperature
- 5 to 25°C (41 to 77°F)
- Surface Preparation
Surfaces should be clean, dry and grease-free before applying the adhesive. Permabond Cleaner A is recommended for the degreasing of most surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
- Additional Information
This product is not recommended for use in contact with strong oxidizing materials. This product may affect some thermoplastics and users must check compatibility of the product with such substrates. Information regarding the safe handling of this material may be obtained from the Safety Data Sheet. Users are reminded that all materials, whether innocuous or not, should be handled in accordance with the principles of good industrial hygiene.
- Typical Performance
0.5 mm (0.02 in) with nozzle 0.2 mm (0.008 in) bead on bead
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Low Odor
- Low Viscosity
