PERMABOND® ES562
- Chemical Family
- Epoxy & Epoxy Derivatives
PERMABOND® ES562 is a single-part epoxy adhesive which flows like solder when heated during curing. The adhesive has excellent adhesion to metal surfaces and composites. The high bond strength of this adhesive allows it to replace mechanical fastening, soldering or brazing. The adhesive’s low viscosity is such that it self-levels.
Product families
- Structural Adhesives
Other characteristics
- Brand
- PERMABOND
- Cure Method
- Heat Cure
- Product Type
- 1K (1 component) Adhesive, Epoxy Adhesive
- 1K (1 component) Adhesive
- Epoxy Adhesive
- Compatible Substrates & Surfaces
- Composites, Metal
- Markets
- Adhesives & Sealants
- Cure
- Heat Cure
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Use Direction
The adhesive should be dispensed from the bottle via the nozzle supplied (this can be cut to give the appropriate sized bead to cover the bond area).; Apply the adhesive to one surface and avoid entrapping air.; Assemble parts applying sufficient pressure to ensure the adhesive spreads to cover the entire bond area.; Use a jig / clamp to prevent parts moving during cure.; It is advisable not to disturb the joint until the adhesive is fully cured.; Cure with heat – see page one for cure schedule.
- Benefits and Features
- Excellent adhesive strength
- Excellent resistance to vibration
- Easy to use – no mixing required
- High shear strength
- Low viscosity, self leveling
- Good resistance to chemicals
- Storage Temperature
- 2 to 7°C (35 to 45°F)
- Surface Preparation
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Chemical Resistant
- Good Adhesion
- Good Bonding Strength
- Low Viscosity
- Compatible Substrates and Surfaces
- Composites
- Metal
- Typical Properties (Cured)
Steel 20 - 35 MPa (3000 – 5000 psi) Aluminum 14 - 27 MPa (2000 – 4000 psi) Zinc 14 - 27 MPa (2000 – 4000 psi)
