ATTSHIELD OP 745
ATTSHIELD OP 745 is used and recommended for boats, water tanks, septic tanks, bathtubs, cooling towers, and other items. By hand molding and spraying.
Identification
Product families
Applications
- Consumer Goods — Housewares
- Equipment & Parts
- Other Power Water & Utilities Applications
- Marine
Product Families
- Thermoset Resins
- Polyesters
Other characteristics
- Brand
- ATTSHIELD
- Cure Method
- Air Dry, Chemical Cure
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Casting, Spray Lay-up
- Markets
- Automotive & Transportation
- Consumer Goods
- Industrial
- Storage
Store in a cool place below 25°C, away from moisture and direct sunlight. If stored for a long period of time, precipitation of the thixotropic agent is possible. Therefore, before use, the resin should be homogenized (roll or shake the barrel, when stored in a container, mix with minimal air access). During this, the temperature of the resin must be above 18°C, otherwise the LSE system may separate and settle on the surface in the form of foam.
- Appearance
- Turbid Blue Liquid Without Foreign Inclusions
- Cure
- Air Dry
- Chemical Cure
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Drums
- Transportation
Transport must be carried out in conditions protected from direct exposure to heat or moisture.
- Characteristic
Low viscosity, pre-accelerated, thixotropic, unsaturated polyester resin with an orthophthalic cure indicator. Resin of medium reactivity. Cures with PMEK (methyl ethyl ketone peroxide: Butanox M-50, Promox P 200TX) at room temperature.
- Composites End Use
- Marine Applications
- Tanks
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Casting
- Spray Lay-up
- Plastics and Elastomers End Uses
- Sanitary Ware
- Septic Tanks
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brookfield Dynamic Viscosity (at a Temperature of 23.0°С) | 200-250 | mPas | GOST 25271 |
| Mass Fraction of Non-Volatile Substances | 56.0 - 60.0 | % | GOST 31939 |
| Acid Number (in Supplied Form) | max. 30 | mg KOH/g | GOST 23955, m. A |
| Gelatinization Time at a Temperature of (23.0±0.5 °C) | 40-50 | minutes | GOST 22181 method C1 |
| Warranty Period of Storage | 3.0 | months | — |
