To catalogue
ATTSHIELD OP 145
ATTSHIELD OP 145 is recommended for water tanks, septic tanks, bathtubs, cooling towers, and other similar applications.
Identification
Product families
Applications
Applications
- Consumer Goods — Housewares
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Power, Water & Utilities
- Other Power Water & Utilities Applications
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Plastics — Thermoset Resins
- Polyesters
Other characteristics
- Brand
- ATTSHIELD
- Cure Method
- Air Dry, Chemical Cure
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Casting, Spray Lay-up
- Markets
- Consumer Goods
- Industrial
- Storage
Store in a cool place below 25°C, away from moisture and direct sunlight.
- Appearance
Clear Liquid From Light Yellow To Light Pink Color Without Strangers Inclusions
- Cure
- Air Dry
- Chemical Cure
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Drums
- Transportation
Transport must be carried out in conditions protected from direct exposure to heat or moisture.
- Characteristic
Low viscosity, pre-accelerated, non-thixotropic, unsaturated polyester resin based on orthophthalic. Resin of medium reactivity. Cures with PMEK (methyl ethyl ketone peroxide: Butanox M-50, Promox P 200TX, etc. at 1%) at room temperature.
- Composites End Use
- Tanks
- Material Features
- Low Viscosity
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Casting
- Spray Lay-up
- Plastics and Elastomers End Uses
- Sanitary Ware
- Septic Tanks
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.3 | % | According to GOST 4650 |
| Elongation at Break | 12.0 | % | According to GOST 11262 |
| Compressive Stress | 45.0 | MPa | GOST 4651 |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brookfield Dynamic Viscosity (at a Temperature of 23.0±0.5) | 350-500 | °C, s | According to GOST 25271 |
| Mass Fraction of Non-Volatile Substances | 54.0 - 60.0 | % | GOST 31939 |
| Acid Number (in Supplied Form) | max. 35 | mg KOH/g | GOST 23955, m. A |
| Gelatinization Time at a Temperature of (23.0±0.5 °C) | 25-45 | minutes | GOST 22181 method C1 |
| Warranty Period of Storage | 3.0 | months | — |
| Exothermic Peak Temperature | 145.0 | °WITH | — |
