To catalogue
McNAMEE® Clay
- CAS Number
- 1332-58-7
- EC Number
- 310-194-1
- Chemical Name
- Kaolin, Sodium Borate Silicate
- Chemical Family
- Calcium Salts, KaolinsCalcium SaltsKaolins
McNAMEE® Clay is a low cost air-floated kaolin reinforcer and inert filler. It is also used in crack fillers, caulking compounds, and elastomers.
Properties
- Physical Form
- Powder, Solid
- Powder
- Solid
Identification
- CASE Ingredients Features
- Good BrightnessSprayability
- CASE Ingredients Functions
- Filler
Product families
Applications
Adhesives & Sealants — Building & Construction
- Construction Adhesives
- Sealants & Caulks
Building & Construction — Building Materials
- Construction Adhesives
- Sealants & Caulks
Printing & Packaging — Packaging Coatings
- Primers & Lacquers
Paints & Coatings — Packaging Coatings
- Primers & Lacquers
Product Families
CASE Ingredients — Additives
- Fillers & Extenders
Industrial Additives & Materials — Construction Chemicals
- Cement & Concrete Additives
Other characteristics
- Brand
- McNAMEE
- Features
- Good Brightness, Sprayability
- Functions
- Carrier, Filler
- Usage
Low cost reinforcer and inert filler for all elastomers.; Used in non-black stocks of all types.; Lighter color and increases modulus less than DIXIE CLAY.
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Coating Type
- E-Coat & Electrodeposition
- Latex
- Primer
- Waterborne Coating
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ECL (Korea)
- EEC/EU
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- Industrial Additives Functions
- Carrier
- Filler
Technical data
Table 1 of 2
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fineness (Retained on 325 mesh) | max. 0.7 | % | T-938 |
| Moisture Content | max. 1.0 | % | T-936 |
| Brightness | 75.0 | — | — |
| Density (At 25°C) | 2.6 | Mg/m³ | — |
| Loss on lgnition | 14.0 | % | — |
| pH Value (10% SIurry) | 4.8 | — | — |
| Pounds per Gallon | 21.7 | — | — |
| Oil Absorption | 33.0 | — | ASTM D 281 |
| Horiba PSD D10 | 0.27 | μm | — |
| Horiba PSD D50 | 2.55 | μm | — |
| Horiba PSD D90 | 9.61 | μm | — |
| Horiba PSD D95 | 12.39 | μm | — |
Table 2 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Silicon Dioxide | 45.2 | % |
| Aluminum Oxide | 37.5 | % |
| Iron Oxide | 0.7 | % |
| Titanium Dioxide | 1.4 | % |
| Calcium Oxide | max. 0.01 | % |
| Potassium Oxide | 0.34 | % |
| Magnesium Oxide | 0.12 | % |
| Loss on Ignition (1000°C) | 13.8 | % |
