Guarniflon SC1600/HOLLOW GLASS
- Chemical Family
- Fluoropolymers
Guarniflon SC1600/HOLLOW GLASS is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors. An innovative material to replace asbestos based seals and conventional PTFE products.
Properties
- Physical Form
- Rods, Sheets, Tube
- Rods
- Sheets
- Tube
- Uses Pharmaceutical Industry
- Piping
- Fittings
- Valves
- Centrifuges
Product families
- Consumer Goods — Appliances & Electronics
- Cooling & Climate
- Fuel Systems
- Other Automotive Applications
- Pipes & Plumbing
- Structural Components
- Equipment & Parts
- Other Industrial Applications
- Food & Beverage Packaging
- Other Parts & Components
Other characteristics
- Density
- 930.0 - 950.0 kg/m³
- Features
Chemical Resistant, Good Compressive Strength, Good Thermal Conductivity, Low Thermal Expansion, Wear Resistant; Superior chemical resistance (acids, solvents, refrigerants, water; Low bolt load; No aging; Excellent compressibility; Superior sealability; No water absorption; Non - flammable; Easy mainenance (assembling/disassembling); Complies with FDA 21 CFR 177.1550. In compliance with TA-Luft VDI 2240
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Technology
- Composite Materials
- Plastics
- Fillers Included
- Glass Fiber
- Product Families
- Composite Materials — Parts & Shapes
- Plastics — Parts, Shapes & Films
- Material Features
- Chemical Resistant
- Good Compressive Strength
- Good Thermal Conductivity
- Low Thermal Expansion
- Wear Resistant
- Certifications and Compliance
- FDA 21 CFR 177.1550
- Plastics and Elastomers End Uses
- Bearings
- Food Packaging
- Valve Seats
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.55 - 1.65 | g/cm3 | ASTM D792 |
| Hardness | min. 55 | Shore D | ASTM D2240 |
| Tensile Strength | min. 10 | N/mm2 | ISO 527 |
| Elongation at Break | min. 200 | % | ISO 527 |
| Volume Resistivity at 500 V | 10^12 | Ω.cm | ASTM D276 |
