Guarniflon G405/GLASS
- Chemical Family
- Fluoropolymers
Guarniflon G405/GLASS is a PTFE grade - virgin and compounded - certified and approved according to international standards for food and drinking applications. It is certified and approved according to international standards for applications in the food and drinking water sectors.
Properties
- Physical Form
- Rods, Sheets, Tube
- Rods
- Sheets
- Tube
Product families
- Consumer Goods — Appliances & Electronics
- Cooling & Climate
- Fuel Systems
- Other Automotive Applications
- Pipes & Plumbing
- Structural Components
- Equipment & Parts
- Other Industrial Applications
- Food & Beverage Packaging
- Other Parts & Components
Other characteristics
- Density
- 2140.0 - 2180.0 kg/m³
- Features
Chemical Resistant, Good Compressive Strength, Good Thermal Conductivity, Low Thermal Expansion, Wear Resistant
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Property
Enhanced wear resistance.; Enhanced chemical resistance (except for alkali and hydrofluoric acid).
- Product INFO
Guarniflon can offer an extremely wide range of skived tapes, sheets, extruded and molded rods and tubes, in compounded PTFE from G series. Dimensions and relevant tolerances are included in the Dimensional Brochure. Tapes, sheets and finished products can be supplied etched.
- Technology
- Composite Materials
- Plastics
- Fillers Included
- Glass Fiber
- Product Families
- Composite Materials — Parts & Shapes
- Plastics — Parts, Shapes & Films
- Material Features
- Chemical Resistant
- Good Compressive Strength
- Good Thermal Conductivity
- Low Thermal Expansion
- Wear Resistant
- Certifications and Compliance
- FDA 21 CFR 175.300
- FDA 21 CFR 177.1550
- WRAS (UK)
- Plastics and Elastomers End Uses
- Bearings
- Food Packaging
- Valve Seats
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.20 - 2.26 | g/cm3 | ASTM D792 |
| Hardness | min. 60 | Shore D | ASTM D2240 |
| Tensile Strength | min. 17 | N/mm2 | ISO 527 |
| Elongation at Break | min. 230 | % | ISO 527 |
| Deformation Under Load (13,7 N/mm2, 24 h at 23°C) | max. 12 | % | AASTM D621 |
| Permanent Deformation (After 24 h Relaxation at 23°C) | max. 7.5 | % | AASTM D621 |
| Coefficient of Linear Thermal Expansion 25-100°C | 7.5 - 11 | 10-5(mm/mm)/°C | ASTM D696 |
| Coefficient of Dynamic Friction | 0.16 | — | ASTM D1899 |
| Volume Resistivity at 500 V | 10^16 | Ω.cm | ASTM D262 |
