To catalogue
Guarniflon G415/CARBON
- Chemical Family
- Fluoropolymers
Guarniflon G415/CARBON is a PTFE grade - virgin and compounded - certified and approved according to international standards for food and drinking applications. It is certified and approved according to international standards for applications in the food and drinking water sectors.
Properties
- Physical Form
- Rods, Sheets, Tube
- Rods
- Sheets
- Tube
Product families
Applications
- Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
- Other Automotive Applications
Building & Construction — Building Materials
- Pipes & Plumbing
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Printing & Packaging — Packaging
- Food & Beverage Packaging
Electrical & Electronics — Parts & Components
- Other Parts & Components
Other characteristics
- Density
- 2050.0 - 2110.0 kg/m³
- Features
Good Compressive Strength, Good Thermal Conductivity, Low Deformation Tendency, Low Thermal Expansion, Wear Resistant
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Reinforcement Material
- Carbon Fibers
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Property
- Good thermal conductivity.
- Good resistance to deformation.
- Product INFO
Guarniflon can offer an extremely wide range of skived tapes, sheets, extruded and molded rods and tubes, in compounded PTFE from G series. Dimensions and relevant tolerances are included in the Dimensional Brochure. Tapes, sheets and finished products can be supplied etched.
- Technology
- Composite Materials
- Plastics
- Fillers Included
- Carbon Fiber
- Product Families
- Composite Materials — Parts & Shapes
- Plastics — Parts, Shapes & Films
- Material Features
- Good Compressive Strength
- Good Thermal Conductivity
- Low Deformation Tendency
- Low Thermal Expansion
- Wear Resistant
- Certifications and Compliance
- FDA 21 CFR 177.1550
- Plastics and Elastomers End Uses
- Bearings
- Food Packaging
- Valve Seats
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.05 - 2.11 | g/cm³ | ASTM D792 |
| Hardness | min. 60 | Shore D | ASTM D2240 |
| Tensile Strength | min. 15 | N/mm2 | ISO 527 |
| Elongation at Break | min. 150 | % | ISO 527 |
| Deformation Under Load (13,7 N/mm2, 24 h at 23°C) | max. 7 | % | AASTM D621 |
| Permanent Deformation (After 24 h Relaxation at 23°C) | max. 4 | % | AASTM D621 |
| Coefficient of Linear Thermal Expansion 25-100°C | 7-12 | 10-5(mm/mm)/°C | ASTM D696 |
| Coefficient of Dynamic Friction | 0,13 | — | ASTM D1901 |
| Volume Resistivity at 500 V | 10^6 | Ω.cm | ASTM D264 |
