Guarniflon SC1200/GLASS
- Chemical Family
- Fluoropolymers
Guarniflon SC1200/GLASS is a PTFE grade - virgin and compounded - certified and approved according to international standards for food and drinking applications. It is certified and approved according to international standards for applications in the food and drinking water sectors. An innovative material to replace asbestos based seals and conventional PTFE products.
Properties
- Physical Form
- Rods, Sheets, Tube
- Rods
- Sheets
- Tube
Product families
- Consumer Goods — Appliances & Electronics
- Cooling & Climate
- Fuel Systems
- Other Automotive Applications
- Pipes & Plumbing
- Structural Components
- Equipment & Parts
- Other Industrial Applications
- Food & Beverage Packaging
- Other Parts & Components
Other characteristics
- Density
- 2160.0 - 2200.0 kg/m³
- Features
Chemical Resistant, Good Compressive Strength, Good Thermal Conductivity, Low Thermal Expansion, Wear Resistant; Superior chemical resistance; Excellent resistance to deformation; No aging; High compressibility; High sealability; No water absorption; Non-flammable; Easy maintenance (assembling/disassembling); Complies with FDA specifications 21 CFR 177.1550 21 CFR 175.300 Complies with REG. EU 10/2011 In compliance with TA-Luft VDI 2240
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Reinforcement Material
- Glass Fibers
- Usage
- Uses Chemical and Petrochemical Industry
- Heat exchangers
- Piping
- Flanged fittings
- Valves
- Pumps
- Food and Pharmaceutical Industry
- Flat seals
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Technology
- Composite Materials
- Plastics
- Fillers Included
- Glass Fiber
- Product Families
- Composite Materials — Parts & Shapes
- Plastics — Parts, Shapes & Films
- Material Features
- Chemical Resistant
- Good Compressive Strength
- Good Thermal Conductivity
- Low Thermal Expansion
- Wear Resistant
- Certifications and Compliance
- FDA 21 CFR 175.300
- FDA 21 CFR 177.1550
- Plastics and Elastomers End Uses
- Bearings
- Food Packaging
- Valve Seats
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.20 - 2.26 | g/cm3 | ASTM D792 |
| Hardness | min. 60 | Shore D | ASTM D2240 |
| Tensile Strength | min. 14 | N/mm2 | ISO 527 |
| Elongation at Break | min. 350 | % | ISO 527 |
| Volume Resistivity at 500 V | 10^12 | Ω.cm | ASTM D274 |
