Bomar Oligomers® BR-1041MB
BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of biobased content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balnce of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality and tin-free nature make this an excellent choice for consumer applications with low irritancy.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Labeling Claims
- Bio-based, Tin-free
- Bio-based
- Tin-free
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Industrial
- Features
- Tin free
- High biobased content
- Good impact resistance
- Low skin sensitivity
- High tensile strength
- Relatively low color (<50 APHA)
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Top Coat
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Adhesion
Cold Rolled Steel; *Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- 3D Printing Resins
- Acrylic Resins
- Coatings
- Resins
- Chemical Base
- Improved Flexibility
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.1 | g/cm3 |
| Durometer Hardness | 80D | — |
| Elongation at Break | 35 | % |
| Nominal Viscosity (at 60°C) | 8900 | cP |
| Nominal Viscosity (at 25°C) | 8900 | cP |
| Refractive Index (at 25°C) | 1.49 | — |
| Tensile at Break | 23 | MPa |
| Glass Transition Temperature (DMA) | 89 | °C |
| Viscosity (at 60°C) | 8900 | cP |
