Bomar Oligomers® XDT-1018
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceExcellent Scratch ResistanceFast CureGood Mechanical PropertiesLow Oxygen InhibitionLow ViscosityThermal Resistance
- Chemical Family
- Dendritic Acrylates
BOMAR®XDT-1018 is a dendritic acrylate with an average functionality of 18. The hyper-branched structure of XDT-1018 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance. XDT-1018 is ideal in applications where withstanding exposure to the harshest conditions is paramount.Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 350 °C.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Overprint Varnishes
- Overprint Varnishes
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Labeling Claims
- Tin-free
- Markets
- Paints & Coatings
- Printing & Packaging
- Coating Type
- Varnishes
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- HIGHLIGHTS
- Enhances Chemical Resistance
- Provides Thermal Resistance
- Low Diluted Viscosity
- Rapid Cure
- Abrasion & Scratch Resistant
- Low Shrinkage
- Low Oxygen Inhibition
- Tin Free
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
Cold Rolled Steel; X Recommended XX Highly Recommended XXX Strongly Recommended; * Brookfield – CAP 2000+ @ 25°C.; Tensile Strength, psi**; Elastic Modulus, ksi*; Durometer Hardness; Water Absorption, 96 (24 hrs); MEK Double Rubs (#); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Recommended Applications
- Hard, Protective Coatings
- Overprint Varnishes
- Printing Inks
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Refractive Index (20°C) | 1.510 | — |
| Density (25°C) | 1.15 | g/cm3 |
| Viscosity (25°C) | 50,000 | cP |
| Color | max. 50 | APHA |
