Bomar Oligomers® BR-970BT
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceFast CureGood AestheticsGood Balance of PropertiesGood ElongationGood Hydrolysis ResistanceGood Mechanical PropertiesGood ToughnessHigh GlossHigh Impact ResistanceLow MeHQ ContentLow ViscosityNon-Yellowing GradeStain ResistanceWeather Resistance
- Chemical Family
- Urethane Acrylate/Isocyanate
BOMAR™ BR-970BT is a low molecular weight, difunctional, aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low yellowing properties where premium performance is required. This material has low skin sensitivity for dental and cosmetic applications.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Inkjet Printing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- Labeling Claims
- Bisphenol A-free
- Markets
- Printing & Packaging
- Features
- Low viscosity
- Hydrolytic stability
- Abrasion and chemical resistant
- Excellent cure response
- Glossy finish
- Non-yellowing
- Stain resistant
- Impact resistant
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Ink and Toner Type
- Inkjet Ink
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
* Brookfield – CAP 2000+ @ 25°C.; ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure; X Recommended XX Highly Recommended XXX Strongly Recommended
- Base Chemicals End Uses
- Electrical/Electronic Applications
- Inks
- Base Chemicals Functions
- Oligomer
- Recommended Applications
- Inkjet printing
- Graphic arts
- Rapid prototyping 3D printing resins
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (25 °C) | 1.12 | g/cm3 |
| Pt-Co(APHA) Color | 30 | — |
| Pt-Co Color | 30 | APHA |
| Refractive Index (25°C) | 1.489 | — |
| Viscosity (25 °C) | 10000 | cP |
Типичные рецептуры
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| ABS | — | — | XXX |
| Cold Rolled Steel Glass | XX | XXX | XX |
| HDPE | — | — | — |
| PET | XX | XXX | XX |
| PMMA | — | — | XXX |
| Polycarbonate | XXX | XX | XXX |
| PolypropylenePVC | XXX | XXX | XXX |
| Stainless Steel | — | — | — |
