Bomar Oligomers® BRC-8430E
BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as\nformulations that need to pass autoclave or 85/85 testing.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Industrial
- Features
- Low Tg
- Hydrophobic
- Flexible
- Low yellowing
- Broad adhesion to glass, metals, and plastics
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Typical Formulations
Cold Rolled Steel; * Recommended ** Highly Recommended *** Strongly Recommended; * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- Acrylic Resins
- Adhesives
- Coatings
- Resins
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Glass
- Metal
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.1 | g/cm3 |
| Durometer Hardness | 70A | — |
| Elongation at Break | 230 | % |
| Nominal Viscosity (at 60°C) | 22000 | cP |
| Nominal Viscosity (at 25°C) | 29000 | cP |
| Refractive Index (at 25°C) | 148 | — |
| Tensile at Break | 6 | MPa |
| Glass Transition Temperature (DMA) | -0.15 | °C |
| Viscosity (at 60°C) | 22000 | cP |
