Bomar Oligomers® BR-582
BR-582 is a 2.4 average functional aliphatic polyether urethane acrylate. As with other BR-500 series materials, BR-582 is designed to offer a balance of benefits between toughness and flexibility. While only slightly lower in tensile strength and hardness than BR-571, BR-582 has almost double the total elongation at break. BR-582 responds quickly to UV cure, owing to its elevated functionality.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Industrial
- Features
- Develops impact resistance
- Enhances flexibility
- Exhibits hydrolytic stability
- Provides weatherability
- Imparts toughness
- Great tensile strength
- Oil and chemical resistant
- Gloss finish
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Adhesion
Cold Rolled Steel; * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Adhesive & Sealant Type
- Radiation Curable Adhesive
- Base Chemicals End Uses
- Adhesives
- Coatings
- Resins
- Chemical Base
- Excellent Hydrolytic Stability
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
- ** Per ASTM D882 – Not Tested
- Compatible Substrates and Surfaces
- Glass
- Metal
- Plastics
- Stainless Steel
- Steel
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.15 | g/cm3 |
| Refractive Index (at 25°C) | 1.475 | — |
| Viscosity (at 60°C) | 179000 | cP |
