Bomar Oligomers® BRC-843SD1
BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Consumer Goods
- Industrial
- Features
Improves adhesion; Enhances hardness; Nonyellowing and high gloss; Low water absorption; Exhibits hydrolytic stability; Provides excellent chemical and temperature resistance; Provides alkali resistance
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Adhesion
Cold Rolled Steel; * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- Automotive Applications
- Coatings
- Electrical/Electronic Applications
- Inks
- Medical Devices
- Resins
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Glass
- Metal
- Plastics
- Steel
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.1 | g/cm3 |
| Durometer Hardness | 70A | — |
| Elongation at Break | 230 | % |
| Nominal Viscosity (at 60°C) | 22000 | cP |
| Nominal Viscosity (at 25°C) | 29000 | cP |
| Refractive Index (at 25°C) | 1.479 | — |
| Tensile at Break | 6 | MPa |
| Glass Transition Temperature (DMA) | -0.15 | °C |
| Viscosity (at 60°C) | 33000 | cP |
