Bomar Oligomers® BR-5413MB
BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact resistant coatings, and provides low color and excellent non-yellowing performance.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Industrial
- Features
- Very excellent optical clarity
- Extremely high tensile strength
- Exhibits hydrolytic stability
- Non-yellowing
- Good impact resistance
- Provides weatherability
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Adhesion
Cold Rolled Steel; * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- 3D Printing Resins
- Acrylic Resins
- Adhesives
- Coatings
- Resins
- Chemical Base
- Excellent Hydrolytic Stability
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.08 | g/cm3 |
| Durometer Hardness | 84D | — |
| Elongation at Break | 7.5 | % |
| Nominal Viscosity (at 60°) | 4000 | cP |
| Nominal Viscosity (at 25°C) | 5100 | cP |
| Refractive Index (at 25°C) | 1.49 | — |
| Tensile at Break | 35 | MPa |
| Glass Transition Temperature (DMA) | 98 | °C |
| Viscosity (at 60°C) | 4000 | cP |
