Bomar Oligomers® BR-581MT
BR-581MT is an oligomer blend that provides a low color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating for nail applications, please see our sell sheet for a starting point formula.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Nail Care
- Chemical Manufacturing
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- Bomar Oligomers
- Labeling Claims
- Tin-free
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Markets
- Industrial
- Personal Care
- Features
Tack-free surface cure with low intensity LED lamps; Excellent gloss; Tin-free; Flexibility to prevent chipping; Superior hardness; Low-yellowing; Low MEHQ levels and INCI listed; Excellent shelf stability up to 50°C
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Top Coat
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Adhesion
* Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- Acrylic Resins
- Resins
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.12 | g/cm3 |
| Durometer Hardness | 42D | — |
| Elongation at Break | 50 | % |
| Nominal Viscosity (at 25°C) | 8000 | cP |
| Nominal Viscosity (at 25°C) | 1100 | cP |
| Refractive Index (at 25°C) | 1.49 | — |
| Tensile at Break | 2 | MPa |
| Glass Transition Temperature (DMA) | 44 | °C |
| Viscosity (at 60°C) | 8000 | cP |
