Bomar Oligomers® BR-3042
- CASE Ingredients Features
- Good ElongationImproved FlexibilityImproves AdhesionSolvent Resistance
- Chemical Family
- Urethane Acrylate/Isocyanate
Bomar BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elongative, tacky systems ideal for use in UV pressure sensitive adhesives (PSA), or UV-curable laminating adhesives.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Tape & Label Adhesives
- Tapes & Labels
Product Families
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- End Uses
Pressure Sensitive Adhesive, Radiation Curable Coating
- Markets
- Adhesives & Sealants
- Printing & Packaging
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- CASE Ingredients
- HIGHLIGHTS
- Enhances Adhesion
- Increases Flexibility
- Improves Solvent Resistance
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
Cold Rolled Steel; X Recommended XX Highly Recommended XXX Strongly Recommended; *Brookfield – CAP 2000+ @ 25°C.; Tensile Strength, psi**; Elastic Modulus, ksi*; Durometer Hardness; Water Absorption, 96 (24 hrs); MEK Double Rubs (#); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Adhesive & Sealant Type
- Pressure Sensitive Adhesive
- Recommended Applications
- UV Pressure Sensitive Adhesives
- Laminating Adhesives
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (25 °C) | 1.03 | g/cm3 |
| Pt-Co Color(APHA) | 200 | — |
| Refractive Index (25°C) | 1.46 | — |
| Viscosity (25 °C) | 20000 | cP |
