Bomar Oligomers® BR-930D
- CASE Ingredients Features
- Fast CureGood Shrinkage ResistanceGood ToughnessHigh Heat Distortion TemperatureHigh Impact ResistanceImproved FlexibilityLow Skin SensitivityTemperature Resistance
- Chemical Family
- Urethane Acrylate/Isocyanate
Bomar®BR-930D is a trifunctional, urethane acrylate oligomer which offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance,and durability. BR-930D is perfect for 3D printing applications usingSLA, 3D inkjet,and DLP printers.
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Consumer Goods — Furniture
- Floor Coatings
- Wood Coatings & Finishes
- Floor Coatings
- Furniture Coatings
- Inkjet Printing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Printing & Packaging
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Ink and Toner Type
- Inkjet Ink
- HIGHLIGHTS
- High Heat Distortion Temperature
- Rapid Cure Speed
- Impact Resistance
- Low Skin Irritation
- Good Toughness
- Enhances Weatherability
- High Temperature Stability
- Low Shrinkage
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
BR-930D; Irgacure® 184; 4,400; * Brookfield – CAP 2000+ @ 25°C.; 5.012; 4.740; 4.092; 4.165; 4.213; 215; 213; 201; 263; 182; 87D; 92D; 86D; Water Absorption, %(24 hrs); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure; X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Base Chemicals End Uses
- Inks
- Recommended Applications
- 3D Printing Inks & Resins
- Wood Floor Coatings
- Furniture Coatings
- Inkjet
- Compatible Substrates and Surfaces
- Wood
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Pt-Co Color (APHA) | 55 | — |
| Pt-Co Color | 55 | APHA |
| Refractive Index (25°C) | 1.51 | — |
| Viscosity (60°C) | 7,725 | cP |
| Density (25°C) | 1.106 | g/cm3 |
Типичные рецептуры
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| BR-930D | 70 | 50 | 50 |
| IBOA | 30 | 50 | — |
| TMPTA | — | — | — |
| TPGDA | — | — | 50 |
| HDDA | — | — | — |
| HEMA | — | — | — |
| Irgacure® 184 | 2 | 2 | 2 |
| Viscosity, 25°C (CAP2000+) | 4,400 | 440 | 2,600 |
Типичные рецептуры
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength, (psi, ASTM D882) | 5.012 | 4.740 | 4.092 |
| Elongation (%, ASTM D882) | 4.9 | 3.39 | 5.38 |
| Elastic Modulus (ksi, ASTM D882) | 215 | 213 | 201 |
| Durometer Hardness | 87D | 86D | 92D |
| Water Absorption, %(24 hrs) | 0.22 | 0.18 | 0.36 |
| MEK Double Rubs (#) | 20 | 9 | >200 |
| Tg(DMA) = 95°C; Peak tan delta; HDT= 86°C @ 66 psi (DMA) | — | — | — |
Типичные рецептуры
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Aluminum | — | XX | X |
| Cold Rolled Steel | X | XX | X |
| Glass | X | XXX | — |
| HDPE | — | — | — |
| PET | X | XX | XX |
| PMMA | — | XXX | X |
| Polycarbonate | XX | XXX | XXX |
| Stainless Steel | X | XX | XX |
