Bomar Oligomers® BR-952
- CASE Ingredients Features
- Fast CureGood ToughnessHigh Glass Transition TemperatureHigh GlossHigh Heat Distortion TemperatureHigh Tensile StrengthLow Heat GenerationLow MeHQ ContentLow ViscosityNon-Yellowing Grade
- Chemical Family
- Urethane Acrylate/Isocyanate
BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is also used in coatings for construction applications when improved toughness is desired for excellent durability. BR-952 provides an inherently high HDT of 143°C and a Tg of 159°C, and is inherently tin-free
Identification
- CASE Ingredients Functions
- Oligomer
Product families
- Oligomers
- Acrylics Acrylates & Methacrylates
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- Labeling Claims
- Tin-free
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- HIGHLIGHTS
- Fast curing
- High gloss
- Low in color
- Tin-free
- Provides toughness and high tensile strength
- Low viscosity
- Low MeHQ content
- High Tg and HDT
- Safety Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
- Typical Formulations
* Brookfield – CAP 2000+ @ 25°C.; Tensile Strength, psi**; Elastic Modulus, ksi*; Durometer Hardness; Water Absorption, 96 (24 hrs); MEK Double Rubs (#); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure; X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Base Chemicals End Uses
- Inks
- Recommended Applications
- Predominant resin for nail coatings
- Scratch resistant coatings
- Light curable dental composite resins
- Rigid 3D printing resin
- Base Chemicals Functions
- Oligomer
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Pt-Co Color | 10 | APHA |
| Refractive Index (25°C) | 1.480 | — |
| Viscosity (25°C) | 7,200 | cP |
| Density (25°C) | 1.100 | g/cm3 |
Типичные рецептуры
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| ABS | X | — | XXX |
| Aluminum | — | — | — |
| Cold Rolled Steel | — | — | — |
| Glass | — | — | — |
| HDPE | — | — | — |
| PET | X | XX | XX |
| PMMA | X | — | XXX |
| Polycarbonate | — | — | XXX |
| PVC | X | — | XXX |
| Stainless Steel | — | — | — |
