Bomar Oligomers® BR-941
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceExcellent Scratch ResistanceFast CureImproved HardnessOil ResistanceWeather Resistance
- Chemical Family
- Urethane Acrylate/Isocyanate
Bomar™ BR-941, a hexafunctional, aliphatic polyether urethane acrylate, isusedin applications that require a hard, chemicallyresistant, non-yellowing coating or adhesive with very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Floor Coatings
- Wood Coatings & Finishes
- Floor Coatings
Product Families
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- Markets
- Building & Construction
- Paints & Coatings
- Technology
- CASE Ingredients
- HIGHLIGHTS
- Fast Cure Response
- Provides Hardness
- Oil & Chemical Resistant
- Non-Yellowing
- Imparts Scratch Resistance
- Improves Abrasion Resistance
- Exhibits Hydrolytic Stability
- Gloss Finish
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
Cold Rolled Steel; X Recommended XX Highly Recommended XXX Strongly Recommended; * Brookfield – CAP 2000+ @ 25°C.; Tensile Strength, psi**; Elastic Modulus, ksi*; Durometer Hardness; Water Absorption, 96 (24 hrs); MEK Double Rubs (#); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Recommended Applications
- Coatings for Wood
- Plastic Hard Coatings
- Floor Coatings
- Compatible Substrates and Surfaces
- Plastics
- Wood
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (50 °C) | 25,000 | cP |
| Pt-Co Color (APHA) | 30 | — |
| Pt-Co Color | 30 | APHA |
| Refractive Index (25°C) | 1.496 | — |
| Density (25°C) | 1.20 | g/cm3 |
