Bomar Oligomers® BR-970H
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceFast CureGood Hydrolysis ResistanceGood ToughnessHigh Heat Distortion TemperatureHigh ModulusImproved FlexibilityLow ViscosityNon-Yellowing GradeStain Resistance
- Chemical Family
- Urethane Acrylate/Isocyanate
Bomar®BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has high modulus and doesn’t necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well for use in Graphic Arts application. This oligomer canalsobe used in electronics, and automotive applications
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Electronics Coatings
- Electronics Coatings
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
- Oligomers
Other characteristics
- Brand
- Bomar Oligomers
- Markets
- Electrical & Electronics
- Paints & Coatings
- Features
- Very low viscosity
- High modulus
- Improved HDT vs BR-970BT
- Hydrolytic stability
- Rapid cure
- Non-yellowing
- Abrasion and chemical resistance
- Stain resistance
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Ink and Toner Type
- Inkjet Ink
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Typical Formulations
X Recommended XX Highly Recommended XXX Strongly Recommended
- Base Chemicals End Uses
- Automotive Applications
- Inks
- Recommended Applications
- Inkjet printing
- Graphic Arts
- Electronics
- Automotive
- Compatible Substrates and Surfaces
- Glass
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (25 °C) | 1.2 | g/cm3 |
| Pt-Co(APHA) Color | 66 | — |
| Pt-Co Color | 66 | APHA |
| Refractive Index (25°C) | 1.49 | — |
| Viscosity (25 °C) | 24000 | cP |
Типичные рецептуры
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cold Rolled Steel | — | — | — |
| Glass | — | X | — |
| PET | X | X | X |
| PMMA | — | — | — |
| Polycarbonate | XXX | XXX | XXX |
| Stainless Steel | X | X | X |
