Bomar Oligomers® BRS-14320S

CASE Ingredients Features: Chemical ResistanceGood Shrinkage ResistanceImproved FlexibilityImproves AdhesionTemperature Resistance
Chemical Family: Urethane Acrylate/Isocyanate

Bomar® BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications

Identification

CASE Ingredients Functions: Oligomer

Product families

Applications

Electrical & Electronics — Packaging & Assembly

Electronics Coatings

Paints & Coatings — Specialty Coatings

Electronics Coatings

Product Families

CASE Ingredients — Monomers & Intermediates

Oligomers

Base Chemicals & Intermediates — Monomers & Oligomers

Acrylics Acrylates & Methacrylates

Other characteristics

Brand: Bomar Oligomers
Markets: Electrical & Electronics
Paints & Coatings
Technology: Base Chemicals & Intermediates
CASE Ingredients
HIGHLIGHTS: Low Shrinkage
Enhances Flexibility
Improves Adhesion
Exhibits Hydrolytic Stability
Provides Excellent Chemical and
Temperature Resistance
General Information: This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Typical Formulations: Cold Rolled Steel; X Recommended XX Highly Recommended XXX Strongly Recommended; * Brookfield – CAP 2000+ @ 25°C.; Tensile Strength, psi**; Elastic Modulus, ksi*; Durometer Hardness; Water Absorption, 96 (24 hrs); MEK Double Rubs (#); ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Recommended Applications: Low Polarity Coatings
High-Temperature Applications
Thermoforming Coatings & Inks

Technical data

Table 1 of 1

5 rows

Characteristic	Value	Unit
Pt-Co Color (APHA)	40	—
Pt-Co Color	40	APHA
Refractive Index (25°C)	1.425	—
Density (25°C)	1.12	g/cm3
Viscosity (50°C)	18,000	cP