MechT Dispersions E35A
MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate [UDMA], BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resistivity. When compared to FDM-printed ESD parts, ESD resins produced with MechT E35A can achieve fully isotropic conductivity with high resolution and isotropic mechanical properties.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Oligomer
Product families
Applications
- Resin Manufacturing
Product Families
- Oligomers
- Acrylics Acrylates & Methacrylates
Other characteristics
- Brand
- MechT Dispersions
- Compatible Substrates & Surfaces
- Plastics
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
- Carrier
- Urethane Dimethacrylate (UDMA)
- Markets
- Industrial
- Features
Stable dispersion of discrete nanotubes; Promotes electrostatic dissapation in UV-curable formulations; No degradation of mechanical properties; Capable of achieving 104 -109 Ω/sq resistivity; Easy addition to a formula without high shear mixing; Provides carbon content with no carbon trails; MechT dispersions combine Mechnano's novel discrete carbon nanotubes (CNTs) with (meth)acrylated resins for use in UV-curable 3D printing and CASE applications. While CNTs have been available industrially for many years, Mechnano's breakthrough technology allows for CNTs to be dispersed discretely and uniformly in resins, rather than agglomerated in clumps. This dispersion and functionalization technology unlocks the performance benefits of the CNTs, and enables improvements to electrical and thermal conductivity, impact resistance, tear resistance, adhesion, corrosion resistance and more, without degrading mechanical properties of the resin.
- Cure
- Radiation Cure
- Coating Type
- Radiation Curable Coating
- Technology
- Base Chemicals & Intermediates
- CASE Ingredients
- Adhesion
Cold Rolled Steel; * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
- * Brookfield – CAP 2000+ @ 25°C.
- Base Chemicals End Uses
- 3D Printing Resins
- Adhesives
- Coatings
- Inks
- Resins
- Chemical Base
- Corrosion Resistance
- Excellent Adhesion
- Good Mechanical Properties
- High Electrical Conductivity
- High Thermal Conductivity
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Cured Mechanical Properties
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Compatible Substrates and Surfaces
- Plastics
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 25°C) | 1.13 | g/cm3 |
| Durometer Hardness | 90D | — |
| Elongation at Break | 4 | % |
| Nominal Viscosity (at 60°C) | 91000 | cP |
| Nominal Viscosity (at 25°C) | 800 | cP |
| Refractive Index (at 25°C) | 0 | — |
| Tensile at Break | 76.5 | MPa |
| Glass Transition Temperature (DMA) | 157 | °C |
| Viscosity (at 60°C) | 91000 | cP |
| Volume Resistivity | 29000 | Ω*cm |
