PolySurF™ HP
ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.
Properties
- Physical Form
- Liquid
Identification
Product families
- Functional Additives
Other characteristics
- Brand
- ADDAPT Chemicals BV PolySurF
- End Uses
Enamel, Lacquers, Radiation Curable Adhesive, Radiation Curable Coating, Radiation Curable Ink
- Features
Improves Adhesion, Low Migration, Mechanically Stable, Moderate Yellowing Tendency
- Functions
Adhesion Promoter, Coupling Agent, Curing Agent, Flame Retardant, Surfactant, Surfactant (Anionic)
- Labeling Claims
- Halogen-free, Solvent-free
- Halogen-free
- Solvent-free
- Compatible Polymers & Resins
- Acrylics, Epoxies (EP), Polyesters
- Odor
- Sweet smell
- Markets
- Adhesives & Sealants
- Paints & Coatings
- Printing & Packaging
- Storage
The standard inhibition is 75 ppm MEHQ. The product should be stored at a temperature of no less than 10 °C and no more than 25 °C and away from light. It must be stored under air atmosphere, as the presence of oxygen is essential to activate the stabilizer.. Under these conditions, the product is commercially guaranteed for twelve months after delivery.
- Benefits
PolySurF HP promotes adhesion to metal, metal oxides, glass and concrete.; It is an effective flame retardant, which does not contain halogens. Addition of approximately 4%, results in a final P content of the flame-retardant polyester or polyacrylate of approx. 0.5 %.; It improves both the storage and mechanical stability of an emulsion system, whereas grit building and foam formation is minimized.; No migration of the surfactant occurs after film formation; Paints and lacquers based on emulsions containing this "build-in" anionic surfactant show improved wet-scrub resistance, improved adhesion to metal and high yellowing resistance even after enamel application; The mono-phosphate ester can be reacted with emulsions containing polymers with 2 or more epoxy groups or with emulsions containing, for example, Glycidyl(Meth)acrylate.; The di-phosphate ester affords some degree of crosslinking without gel formation.
- Appearance
- Clear liquid
- Cure
- Radiation Cure
- Liabilities
All recommendations for the use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations, buyer or user remains responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility thereof. Buyer has to ensure that the intended use of the products will not infringe any third party's intellectual property rights. We warrant that our products are free from defects in accordance with, and subject to, our general conditions of sale and supply.
- Coating Type
- Enamel
- Lacquers
- Radiation Curable Coating
- Technology
- CASE Ingredients
- Quality Policy
The objective of our quality policy is the continuous fulfillment of the internal and external requirements agreed upon with our partners with regards to everybody's performance.. The Quality System of ADD APT_x0001_ Chemicals BV is based on the principles of the NEN-EN--ISO-Standard 9001: 2015.
- Ink and Toner Type
- Radiation Curable Ink
- Adhesive & Sealant Type
- Radiation Curable Adhesive
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Content | min. 99.5 | % |
| Color | max. 3 | Gardner |
| pH Value | 0.5 - 3.0 | — |
| Phosphorus Content | approx. 12 | % |
| Viscosity (25°C) | 1250-3500 | — |
