Foamstop™ 100N
- CASE Ingredients Functions
- Defoamer
ADDAPT Foamstop 100N is a complete water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.
Product families
Applications
- Architectural Coatings
- Decorative Paints
- Floor Coatings
- Infrastructure Roads & Paving
- Architectural Coatings
- Decorative Paints Coatings & Stains
- Floor Coatings
- Coatings & Markings
- Other Printing Applications
Product Families
- Foam Control
Other characteristics
- Brand
- Foamstop
- End Uses
- Waterborne Coating
- Functions
- Defoamer
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Benefits
100% solubility in water; no turbidity or haze of the liquid phase in clear systems; Maintains the defoaming properties over a prolonged period of time; Filters and spray nozzles will not be blocked whilst using ADDAPT Foamstop 100N; Effective over a wide pH range (2 to 12); Biodegradable; Does not contain mineral oil, amines, nitrates or fluorides; Metal surfaces are readily cleaned by rinsing with tap water; No paint or plating adhesion problems expected when the defoamer is applied
- Appearance
- Light yellow liquid
- Liabilities
All recommendations for the use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations, buyer or user remains responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility thereof. Buyer has to ensure that the intended use of the products will not infringe any third party's intellectual property rights. We warrant that our products are free from defects in accordance with, and subject to, our general conditions of sale and supply.
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Quality Policy
The objective of our quality policy is the continuous fulfillment of the internal and external requirements agreed upon with our partners with regards to everybody's performance.. The Quality System of ADD APT_x0001_ Chemicals BV is based on the principles of the NEN-EN--ISO-Standard 9001: 2015.
- Storage Stability
- At least 6 months at adequate storage
- Application Methods
- Spray
- Chemical Inventories
- EINECS (EU)
- Certifications and Compliance
- FDA 21 CFR Regulations
- FDA Compliant
- Applications and Typical Treat Level Recommended
Paint industry 0.05 to 0.5 % wt. on total formulation; Printing Ink industry 0.05 to 0.5 % wt. on total formulation; Floor polish- and cleaner industry; Aqueous hydraulic fluids; Aqueous metal working fluids
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point Polyalkylene glycols | min. 250 | °C |
| Density (20°C) | 1.04-1.07 | gcc |
| Flash Point | min. 160 | °C |
| Viscosity (20°C) | max. 600 | — |
