Foamstop™ VF 10N
- CASE Ingredients Functions
- Defoamer
ADDAPT Foamstop VF 10N is a VOC-free Foam Control Agent for low VOC emulsion systems based on PVAC, Styrene/Acrylics and pure Acrylics. It is a proprietary blend of components based on renewable resources! All constituents comply with the FDA regulation (Incidental contact with foodstuff)
Identification
Product families
Applications
- Water Treatment
Product Families
- Foam Control
Other characteristics
- Brand
- Foamstop
- End Uses
- Waterborne Coating
- Functions
- Defoamer
- Solid Content
- 100.0 - 100.0 %
- Labeling Claims
- VOC-free
- Markets
- Industrial
- Benefits
ADDAPT® Foamstop VF 10N is recommended for the use in pigmented VOC free- Emulsion paints, (Flexo-) Printing Inks as well as clear lacquers and also for Emulsion based Adhesives; ADDAPT® Foamstop VF 10N is easy emulsifiable. 2/3 of the amount should be added during the grinding stage, 1/3 during the 'let down' stage; Very suitable for cost effective, high PVC emulsion paints, textured masonry coatings and renders/plasters (Putz).; Maintains the defoaming properties over a prolonged period of time; ADDAPT® Foamstop VF 10N does not contain Nonylphenol derivatives (APEOfree); silicones/siloxanes; amines; nitrates or fluorides.; No intercoat adhesion problems are expected when the defoamer is applied.
- Appearance
- yellow liquid
- Liabilities
All recommendations for the use of our products, whether given by us in writing, orally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations, buyer or user remains responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility thereof. Buyer has to ensure that the intended use of the products will not infringe any third party's intellectual property rights. We warrant that our products are free from defects in accordance with, and subject to, our general conditions of sale and supply.
- Miscible In
- Water
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Quality Policy
The objective of our quality policy is the continuous fulfillment of the internal and external requirements agreed upon with our partners with regards to everybody's performance.. The Quality System of ADD APT_x0001_ Chemicals BV is based on the principles of the NEN-EN--ISO-Standard 9001: 2015.
- Emulsifiable In
- Mineral oil
- Certifications and Compliance
- FDA 21 CFR Regulations
- FDA Compliant
- Applications and Typical Treat Level Recommended
Paint Industry 0.1 to 1.0% wt. based on total formulation; Adhesive industry 0.1 to 1.0% wt. based on total formulation; (Flexo-) Printing Inks; Floor polish industry; Lubricant industry; Wastewater treatment
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Content | 100 | % |
| Density (20°C) | 0.90 - 0.98 | g/ml |
| Flash Point | min. 125 | °C |
