Sircon SPG-30B
- Chemical Family
- Silicones
Sircon SPG-30B has a high heat transfer / heat dissipation effect because it has good followability to the gap and high adhesion.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Electrical & Electronic Systems
- Consumer Electronics
- Sensors & Actuators
- Jacketing & Insulation
Product Families
- Silicone Elastomers
Other characteristics
- Brand
- Sircon
- End Uses
Appliances, Electrical Components, Electrical Insulation, Temperature Sensor
- Features
Cold Resistance, Good Adhesion, Good Compressive Strength, Good Impact Strength, Good Thermal Conductivity, Heat Resistance, High Flowability, Vibration Damping; Since it is a one-component type and non-curing type, no curing work is required.; It has low repulsive stress and protects electronic components and substrates from compression, vibration, and impact.; It retains the excellent properties of silicone rubber such as heat resistance, cold resistance, and electrical insulation .; Despite its low fluidity, it can be operated with a dispenser.; There is no risk of corroding metals such as copper and aluminum.
- Processing Methods
- Compression Molding
- Merit
Sircon ® is a completely new type of silicone rubber product that has excellent thermal conductivity and flame retardancy, which are excellent in various properties peculiar to silicone rubber such as heat resistance and electrical insulation. It is mainly used for semiconductors such as transistors and ICs, various heaters, electronic components such as temperature sensors, electrical insulation, and heat dissipation / heat transfer spacers.. Sircon® compound type is a low-fluidity type high thermal conductivity silicone compound product. Simply apply it to the surface of the heating element and sandwich it between a heat sink or housing to evenly fill the heat transfer gap, demonstrating highly reliable heat transfer performance.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Usage
We will propose a dispenser system suitable for the usage conditions.
- Technology
- Elastomers
- Material Features
- Cold Resistance
- Good Adhesion
- Good Compressive Strength
- Good Impact Strength
- Good Thermal Conductivity
- Heat Resistance
- High Flowability
- Vibration Damping
- Package Configuration
- 30cc syringe
- 325cc cartridge
- Plastics and Elastomers End Uses
- Appliances
- Electrical Components
- Electrical Insulation
- Temperature Sensor
- Plastics and Elastomers Processing Methods
- Compression Molding
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Thermal Conductivity | 3.1 3.1 | W/m.K | Hot disc method |
| Thermal Resistance (Gap: 0.5mm) | 1.3 1.3 | °C.cm 2/W | ASTM D5470 |
| Thermal Resistance (Gap: 1.0mm) | 2.3 | — | — |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 3.2 | — | JIS K 6220 |
| Viscosity 1.0 (1/s) | 2750.0 | Pa.s | ASTM D1824 |
| Viscosity 0.5 (1/s) | 4600.0 | — | — |
| Thermogravimetric Analysis (Heat Loss) | 0.05 | wt% | (150 ℃, 24 hours) |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 1x10^12 | Ω.m | JIS K 6249 |
