Sircon EGR-11F
- Chemical Family
- Silicones
Sircon EGR-11F sheet that has electromagnetic wave absorption characteristics in addition to thermal conductivity, flame retardancy, and electrical insulation.
Properties
- Physical Form
- Sheets
Product families
- Electrical & Electronic Systems
- Sensors & Actuators
- Jacketing & Insulation
Other characteristics
- Brand
- Sircon
- Color
- Grey
- End Uses
- Electrical Insulation, Temperature Sensor
- Features
Electrically Insulating, Flame Retardant, Good Adhesion, Good Stability, Soft, Thermally Conductive; Noise countermeasures and heat countermeasures can be taken at the same time.; Since the surface is soft and sticky, the gap between the heating element and the heat diffuser / radiator such as a heat sink can be filled evenly.; It also has excellent adhesion followability to uneven surfaces and curved surfaces, so it demonstrates highly reliable heat transfer performance.
- Polymer Name
- Silicone Elastomer
- Merit
Sircon ® is a completely new type of silicone rubber product that has excellent thermal conductivity and flame retardancy, which are excellent in various properties peculiar to silicone rubber such as heat resistance and electrical insulation. It is mainly used for semiconductors such as transistors and ICs, various heaters, electronic components such as temperature sensors, electrical insulation, and heat dissipation / heat transfer spacers.. The Sircon ® electromagnetic wave absorption type can take noise countermeasures and heat countermeasures at the same time by sandwiching it between a heat sink, etc. and a heat generation countermeasure that generates electromagnetic noise and heat. Since the surface is soft and sticky, the gap can be filled evenly.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Flame Rating
- UL 94 V0
- Technology
- Elastomers
- Product Families
- Elastomers — Parts & Shapes
- Material Features
- Electrically Insulating
- Flame Retardant
- Good Adhesion
- Good Stability
- Soft
- Thermally Conductive
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Electrical Insulation
- Temperature Sensor
- Plastics and Elastomers Processing Methods
- Compression Molding
Technical data
Table 1 of 4
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Thermal Conductivity (Hot Wire) | 1.0 | W/m.K |
| Thermal Conductivity (Hot Disc) | 0.8 | — |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Thickness | 0.5 - -1.5 | mm | --- |
| Specific Gravity | 3.1 3.1 | — | JIS K 6220 |
| Hardness (Shore OO) | 56.0 | — | — |
| Hardness (ASKER C) | 28.0 | — | — |
Table 3 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 1x10^10 | Ω.m | JIS K 6249 |
| Breakdown Voltage | 500.0 | V/mm | JIS K 6249 |
| Permittivity (50Hz) | 28.33 | — | JIS K 6911 |
| Permittivity (1kHz) | 27.05 | — | JIS K 6911 |
| Permittivity (1MHz) | 26.09 | — | JIS K 6911 |
| Dissipation Factor (50Hz) | 0.031 | — | JIS K 6911 |
| Dissipation Factor (1kHz) | 0.02 | — | JIS K 6911 |
| Dissipation Factor (1MHz) | 0.005 | — | JIS K 6911 |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Flammability | V-0 | UL-94 |
