Ceramabind™ 643-2

Identification

CASE Ingredients Functions

Binder & Resin

Product families

Other characteristics

Brand

Ceramabind

Features

Air Drying, Chemical Resistance, High Temperature Performance

Compatible Substrates & Surfaces

Ceramic, Metal

Curing

• Air dry at room temperature for 1 - 2 hours.
• Heat cure at 200ºF for 1 - 2 hours.
• Heat cure at 350ºF for 1 - 2 hours.
• Final cure at 500ºF for 1 hour.

Safety

All Ceramabind™ products are water-based materials that can be washed from the skin, in the uncured state, with mild soap and warm water.; Prolonged skin contact should be avoided to prevent irritation.; If any material contacts the eyes, flush continuously with water or neutralizing solutions, then consult a physician immediately.

Show in full

Carrier

Water

Markets

• Adhesives & Sealants
• Industrial
• Paints & Coatings

Storage

Storage Unopened containers have a six-month shelf life when stored at room temperature.; Make sure opened containers are capped securely to prevent evaporation.; Place a plastic film in between the cap and container to prevent air leakage.; Store containers between 45ºF and 95ºF.

Cure

• Air Dry
• Heat Cure

Technology

CASE Ingredients

Application and Mixing

Liquid binder-to-powder weight ratios of 4:1 to 1:1 are recommended when formulating adhesives, coatings and pastes.; Powder binder (875) to filler ratio of 1:4 is recommended.; Blend powder slowly into binder until desired viscosity is achieved.; Vacuum degas as required to reduce entrapped air.; Apply the mixture to clean surfaces.; Extremely smooth surfaces are difficult to wet and should be sandblasted, etched, or slightly oxidized wherever possible.; Porous substrates tend to absorb and separate the binder from the powder; these substrates should be pre-coated with the binder only before applying the mixture.

Show in full

Compatible Substrates and Surfaces

• Ceramic
• Metal