Poly Top Seal CS-20
Poly Top Seal CS-20 is a water-based, non flammable polysiloxane sealer. It is specifically engineered for the treatment of vertical or horizontal concrete substrate for the purpose of providing waterproofing and repellency capability. Poly Top Seal CS-20 provides superior long-term performance and protection against physical and structural defamation or deterioration due to the effects of humidity and or contact with moisture or exposure to the elements. In addition it is also resistant to acids and highly alkaline compounds. CS-20 is designed for use on smooth concrete that is older than 25 years of age and/or exterior applications.
Product families
Applications
- Concrete Coatings & Stains
- Waterproofing & Weatherproofing
- Floor Coatings
- Pavement Highways Roads & Bridges
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Poly Top Seal
- Features
Acid Resistant, Alkali Resistant, Corrosion Resistant, Durable, Long Term Protection, Low VOC, Low Water Absorption, Mildew Resistant, Non-Toxic, UV Resistant
- Product Type
- Sealer
- Application Area
- Bridges, Stucco, Terrazzo
- Bridges
- Stucco
- Terrazzo
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGE
Available in five (5) gallon pails and fifty five (55) gallon drums.
- Storage
Storage should be maintained between 32ºF and 100ºF and out of direct sunlight.
- Technology
CS-20 utilizes unique polysiloxanes coupled with proprietary technologies to provide high performance products that are environmentally safe. This degree of protection is facilitated by increased levels of penetration into the substrate matter. During the curing stage the formula attaches itself to the substrate particles by electrochemical means and acts as a semi permeable membrane which impedes water vapor or liquid from spreading, wetting and absorption through capillary channeling. The resulting semi permeable membrane does not restrict the treated matter from breathing. CS-2O will significantly reduce or eliminate efflorescence due to its principle function.. Ready-to-Use Products
- Labeling Claims
- Low VOC
- Non-Hazardous
- Non-Toxic
- Primary Benefits
The natural look and feel of the substrate is not perceptibly altered.; Non toxic / non-hazardous.; Semi - Homogeneous solution (requires slight agitation prior to application).; Poly Masonry Sealer is a penetrating treatment and may temporarily darken the substrate on which it is applied.; Light citrus odor.; Prevents the water absorption/retention required for the growth of fungi or algae and reduces the adhesion of dirt and organic pollutants.; Reduces or eliminates efflorescence.; Does not restrict the natural breathing ability of the treated matter.; U.V. (Ultraviolet) resistant / extends product life.; Very low VOC content: ~ 0.10 lb. per gallon.; Product performance does not deteriorate at temperatures between –0°F and +470°F.
- Application Methods
Spray. Poly Top Sealer CS-20 can be applied by means of spraying with a conventional, airless (60 psi or below), or Hudson pump up type sprayer. Make sure the masonry, brick and clay substrate to be treated is dry (15% moisture content maximum). Agitate the sealer as indicated on the label; utilize as is. Do not dilute or otherwise alter the material.
- Surface Preparation
The material to be treated should be dry and free of non-integral dust, dirt, mildew, algae or alkali salts. If being applied to an existing structure, the substrate should be thoroughly washed to remove all efflorescence, dirt, mildew and fungi. Allow adequate time for drying prior to application.
- Ready to Use Product Features
- Acid Resistant
- Alkali Resistant
- Corrosion Resistant
- Durable
- Long Term Protection
- Low VOC
- Low Water Absorption
- Mildew Resistant
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Breathability | 97.8 | % | ASTM D1653 |
| Coverage (Pavers) | 350.0 | square feet per gallon | — |
| Coverage (Poured in Place) | 400 - 450 | square feet per gallon | — |
| Coverage (Precast) | 400.0 | square feet per gallon | — |
| Coverage (Split-face) | 300.0 | square feet per gallon | — |
| Flash Point | min. 212 | °F | — |
| NCHRP 244 Chloride Absorption | 97.4 | % | — |
| Penetration | 0.25 - 1.0 | in | — |
| U.V. Resistance (QUV 7500 Hrs) | Pass | — | — |
| VOC Content | max. 0.19 | lbs./gal | — |
| Water Leakage | max. 99.2 | % | ASTM E514 |
