Poly Top Seal CSx-2O
Poly Top Seal CSx-20 is a unique waterborne, non-flammable polysiloxane/teflon penetrating sealer. It is specifically engineered for the treatment of parking decks, bulk storage facilities, truck and rail shops, maintenance areas, veterinary clinics, animal kennels or area's that must have easy ice removal. Poly Top Seal CSx-20 will protect against moisture intrusion as well as oils, chlorines, grease and a variety of acids and solvents (not MEK). Poly Top Seal CSx-20 is a penetrating system that is not susceptible to U.V. degradation.
Product families
- Primers & Sealers
Other characteristics
- Brand
- Poly Top Seal
- Features
Cost Effective, Good Solvent Resistance, Grease Resistant, High Performance, High Temperature Strength, Long Term Protection, Low VOC, Low Water Absorption, Non-Toxic, Oil Resistant, UV Resistant
- Product Type
- Sealer, Waterborne Coating
- Sealer
- Waterborne Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGE
- Available in five (5) gallon pails.
- Storage
Storage should be maintained in sealed containers between 40°F and 100°F and out of direct sunlight. Product is specially mixed to order with low shelf-life expectancy and should be used within 6-12 months post order.
- Technology
The CSx-20 system utilizes unique a chemistry of polysiloxanes coupled with proprietary technologies to provide high performance products that are environmentally safe. Poly Top Seal CSx20 is a highly reactive, cross-linked polysiloxane, Teflon formulation that is capable of penetration rates 1/4" - 3/4" into the concrete. Broom finished surfaces may attain 1.5 inches. The formula attaches itself to the substrate particles by electrochemical means. During the curing process the system reacts with certain elements in the concrete to form a subsurface vapor permeable elastomeric membrane. The membrane allows the treated matter to breathe normally while impeding contaminants from spreading, wetting and ground moisture absorption through capillary channeling. Poly Top Seal CSx-20 may increase the slip coefficient when applied on smooth steel trowel finished surfaces.. Ready-to-Use Products
- Labeling Claims
- Low VOC
- Non-Flammable
- Non-Hazardous
- Non-Toxic
- Primary Benefits
Long-term performance.; Vapor permeable.; U.V. (Ultraviolet) resistant / extends product life.; Oil, Grease and Solvent resistant.; Very cost effective versus urethanes and epoxies.; Prevents the water absorption/retention required for the growth of fungi or algae.; Prevents adhesion of dirt and organic pollutants.; Very low VOC's / non-toxic / non-hazardous.; Provides protection in extreme temperatures (between -50°F and +225°F).
- Application Methods
Spray. Poly Top Seal CSx-20 can be applied by means of spraying with a conventional, airless (60 psi or below), or Hudson pump up type sprayer. Make sure the masonry, brick and clay substrate to be treated is dry (15% moisture content maximum). Agitate the sealer as indicated on the label; utilize as iso not dilute or otherwise alter the material.
- Surface Preparation
The material to be treated should be dry and free of non-integral dust, dirt, mildew, algae or alkali salts. If being applied to an existing structure, the substrate should be thoroughly washed to remove all efflorescence, dirt, mildew and fungi. Allow adequate time for drying prior to application. A light broom or shot blast surface is recommended. Surface can become slick without proper surface preparation, do not burnish surface.
- Ready to Use Product Features
- Cost Effective
- Good Solvent Resistance
- Grease Resistant
- High Performance
- High Temperature Strength
- Long Term Protection
- Low VOC
- Low Water Absorption
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Breathability | 96.6 | % | ASTM D1653 |
| Coverage (Poured in Place Concrete) | 150 - 300 | square feet per gallon | — |
| Coverage (Pressed Concrete Pavers) | 100 - 200 | square feet per gallon | — |
| Flash Point | min. 212 | °F | — |
| NCHRP 244 Chloride Absorption | 98.3 | % | — |
| Penetration | 0.18 - 0.44 | in | — |
| Simulated Wind Driven Rain (FS TTP 0035) | Pass | — | — |
| U.V. Resistance (QUV 7500 Hrs) | Pass | — | — |
| VOC Content | max. 0.27 | lbs./gal | — |
| Water Leakage | 99.4 | % | ASTM E514 |
