HydraLoc®
HydraLoc® is a concrete hardener and is waterborne, non-flammable silicate penetrating solutions. They are specifically designed as a concrete hardener and the stopping of moisture migration or major seepage of concrete decks, slabs, walls, driveways and foundations. Two (2) applications minimum required.
Product families
- Caulks & Sealants
Other characteristics
- Brand
- HydraLoc
- Product Type
Solvent free (100% Solids) Sealant, Waterborne Sealant; Solvent free (100% Solids) Sealant; Waterborne Sealant
- Application Area
- Walkway
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- PACKAGE
Available in five (5) gallon pails and fifty five (55) gallon drums.
- Storage
Storage should be maintained in sealed containers between 40° F and 100° F and out of direct sunlight.
- Technology
HydraLoc is a proprietary aqueous solution with special penetrating agents that help deep sealing of concrete that has severe moisture problems, sluffing or dusting.. Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Non-Hazardous
- Non-Toxic
- VOC-free
- Primary Benefits
- Rapid performance.
- Precipitates calcium-ions.
- Vapor permeable.
- Reduces freeze/ thaw spall.
- UV resistant.
- Stops seepage.
- Stops moisture migration.
- Hardens surface.
- Application Methods
Spray. Apply HydraLoc by means of spraying with a conventional, airless (60 psi or below), or Hudson pump up type sprayer. Apply to clean and damp concrete surfaces Agitate the sealer as indicated on the label; utilize as is. Do not dilute or otherwise alter the material. Caution should be taken to avoid over applying the product by means of puddling. Read all documentation before using. Applicator must determine if his/her project is suited for this product; test a small area first. Do not spray on Aluminum, Copper, Glass or Plastic
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Boiling Point | 214.0 | °F |
| Coverage (Horizontal) | 150 - 200 | square feet per gallon |
| Coverage (Vertical) | 100 - 150 | square feet per gallon |
| Flash Point | 0.0 | — |
| Freezing Point (As Liquid) | 32.0 | °F |
| Penetration | Variable with Density | — |
| pH (Cured) | 7.9 | — |
| U.V. Resistance (QUV 7500 Hrs) | Pass | — |
