KINGMIDE 549
- CASE Ingredients Features
- Blocking ResistanceHeat ResistanceHigh GlossMulti-Substrate AdhesionOil ResistanceWater Resistance
- Chemical Family
- Polyamides
KINGMIDE 549 is fatty polyamide resin especially designed for the flexographic printing ink uses. it is easy to alcohol soluble and mixing organic solvent –such as toluene and alcohol type solvent . the followings are the major characteristics of the KINGMIDE 549 as used in a flexographic printing ink formulation
Properties
- Physical Form
- Pellets
- Solid
- Flexographic-ink test
Ink viscosity (Zahn cup No.4); Ink formulation ~1 10.8 s; Ink formulation ~2 22.3 s; Printing test; The above test ink was printed using a test rotogravure plate onto a treated polyethylene film and treated polypropylene film and the ink films were then subjected to various tests as follows：; Adhesion test：Cellotape Test; Water resistance：The printed film was immersed into tap water for 24 hours. Water; was wiped off of the ink film and the cellotape test and crinkle test; was made.; Oil resistance：24 hours after printing soyabean oil was applied onto the ink film and; after 24 hours rubbing test by using Rubo-tester. load 200g 50 strokes.; Heat resistance：Treated polypropylene film was employed in this case. Heat sealing; test was conducted with a seal tester, load 2 kgf/㎝ 2 and sealing time; 0.5 s.; Blocking resistance：Treated polypropylene film was employed in this case. Using IPI Type Blocking tester. Test condition：Temp. 50℃, Humidity 80％, load 1 kgf /㎝ 2, 24 hours.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Flexography
Product Families
- Other Resins & Binders
Other characteristics
- Brand
- KINGMIDE
- End Uses
- Flexography Ink, Solventborne Ink
- Features
Blocking Resistance, Heat Resistance, High Gloss, Multi-Substrate Adhesion, Oil Resistance, Water Resistance
- Carrier
- Solvent-based
- Markets
- Printing & Packaging
- Appearance
- Brown Yellow Pellets.
- Technology
- CASE Ingredients
- Packaging Type
- Bags
- Ink and Toner Type
- Flexography Ink
- Solventborne Ink
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Point | 117 ± 5 | Ball and Ring /℃ |
| Viscosity (Gardner-Holdt /25℃) | *E ~ H | — |
| Sp.Gr.(25) | 0.98 | ℃ |
| Acid Value | max. 10 | mg KOH/g |
| Amine Value | max. 10 | mgKOH/g |
