TOHMIDE 90
- CASE Ingredients Features
- Chemical ResistanceGood Pigment DispersionGood Release PropertiesHigh GlossMulti-Substrate AdhesionOil ResistanceWater Resistance
- Chemical Family
- Polyamides
TOHMIDE 90 is a fatty polyamide resin synthesized by a polycondensation of mainly the dimerized fatty acid and the alkylenepolyamines.
Properties
- Physical Form
- Pellets
- Solid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Other Resins & Binders
Other characteristics
- Brand
- TOHMIDE
- End Uses
- Gravure Ink, Solventborne Ink
- Features
Chemical Resistance, Good Pigment Dispersion, Good Release Properties, High Gloss, Multi-Substrate Adhesion, Oil Resistance, Water Resistance
- Carrier
- Solvent-based
- Markets
- Paints & Coatings
- Printing & Packaging
- Appearance
- Brown Yellow Pellets
- Technology
- CASE Ingredients
- Ink and Toner Type
- Gravure Ink
- Solventborne Ink
- Gel Recovery Time
Gel recovery time of Tohmide 90 in the mixed solvent system of toluene / isopropanol /ethylacetate. TOHMIDE 90 solutions of various resins contents ( = NV %) in a solvent system of toluene：IPA：ethylacetate = 2：2：1 in weight, have been kept at 10℃ for 24 hours. Afterwards, some of the samples become gelled, and those cold gels were then kept at the room temperature of 20℃where the time (in minutes) needed to recover original fluidity were observed as follows
- Major Characteristics
TOHMIDE 90 shows superior adhesion onto wide variety of surface so that it is highly useful for rotogravure printing inks. (1) Good solubility into various conventional industrial solvents. (2) Superior adhesion onto many kind of substrates. (3) Good wetting (=dispersion,) of the pigments and dyestuffs. (4) Good resistance to water, oil and chemicals. (5) Fast release of the solvent from the printed film. (6) Smooth and hard film surface with high gloss. (7) Good compatibility with nitrocellulose. (8) Smooth and hard film surface with high gloss, which is suitable for over-printings.
- Compatible Polymers and Resins
- Nitrocellulose
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Softening Point | 115 ± 5 | Ball and Ring /℃ |
| Viscosity (Gardner-Holdt /25℃) | *A ~ E | — |
| Acid Value | max. 5 | mg KOH/g |
| Amine Value | max. 3 | mgKOH/g |
| Sp.Gr.(25) | 0.98. | ℃ |
