SUNSHIELD™
SunShield solar protective coating is a premium quality, highly pigmented, polymeric surfacing system designed for heat reduction of parking surfaces. The product is formulated with infrared refl ective pigments to reduce solar absorptance, increase reflectance and achieve the desired solar reflectance index (SRI). SunShield binds specifically graded subangular aggregate for non-slip performance and to achieve a diffuse reflective surface. SunShield contains no PAHs and has an extremely low VOC content.
Other characteristics
- Brand
- Neyra Industries SUNSHIELD
- Features
Anti-Slip, Excellent Toughness, Good Color Stability, Good Flexibility, Good Heat Release Properties, Good Sunlight Resistance, High Reflectivity, Low VOC
- Application Method
- Broom, Brush, Spray, Trowel, Wipe
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Markets
- Building & Construction
- Methods
SunShield can be applied by spray, rubber-bladed squeegee, brush or mechanical equipment specifically designed for this purpose. Due to the heavy bodied nature of the slurry-mixed SunShield, application by means of specialized equipment is recommended. This equipment can be of two types, high volume positive displacement airless spray or mechanical squeegee. Both types must be capable of keeping material thoroughly mixed and homogenous throughout the application process. All equipment used must be capable of supplying a sufficient quantity of material for uniform application over the entire width of the application mechanism to provide a uniformly coated surface.
- PACKAGING
Bulk shipments are made in tank trucks; Available in 5 gal. pails and 55 gal. steel drums; 260 gal. totes available as a special order
- Basic Uses
SunShield provides long wearing, nonfading color and texture to asphalt and concrete pavements including parking lots and walkways. SunShield standard gray meets the LEED-EB Heat Island Reduction: Non-Roof, Option B - Light Color, High Albedo Materials requirements for green buildings.
- Mix Design
Mix well before use and apply at full strength. A maximum of 10% dilution with water may be required when the ambient temperature is above 85° F.
