SILRES® BS Creme F
- Chemical Family
- Silanes, SiloxanesSilanesSiloxanes
SILRES® BS Creme F is an aqueous, solvent-based, creamy hydrophobic impregnating agent based on a mixture of silane and siloxane. It is a high-quality specialty product recommended for the hydrophobic impregnation of natural mineral substrates such as brick, limesandstone, and sandstone. When applied correctly, it effectively reduces water uptake, provides deep penetration, and produces a desirable beading effect. Importantly, the treated surface maintains its natural appearance.
Other characteristics
- Brand
- SILRES
- End Uses
- Primer, Solventborne Coating
- Features
Good Beading Effect, High Capacity of Penetration
- Functions
- Binder, Water Repellent
- Labeling Claims
- Animal Products-free, BSE-free, TSE-free
- Animal Products-free
- BSE-free
- TSE-free
- Markets
- Building & Construction
- Paints & Coatings
- Printing & Packaging
- Appearance
- White or yellowish creme
- Coating Type
- Primer
- Solventborne Coating
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Quality Standards
- BS EN 71:2016 Safety of Toys Standard
- Application Methods
- Brush
- Roller
- Application Details
SILRES® BS CREME F is recommended for the hydrophobic impregnation of mineral substrates like brick, limesandstone and sandstone.; With proper application it leads to a low water uptake, a high penetration depth and a good beading effect.; The natural appearance of the treated surface remains unchanged. SILRES® BS CREME F is best applied to the mineral substrate by the airless technique, undiluted and in the desired thickness. Brushes, lambskin rollers or spatulas may be used for smaller areas.; Up to 100 - 200 g/m² may be applied in one operation to vertical surfaces and roofs, without loss of material. The exact amount depends on the absorbency of the substrate.
- Storage Information
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Active Substance | 25 | wt % | — |
| Density (at 25°C, 1013 hPa) | 0.848 | g/cm³ | DIN 51757 |
| Flash Point | 65 | °C | ISO 2592 |
