NORYL™ Resin NH5110E
SABIC's Specialties Business NORYL™ NH5110E resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with a Vicat B/120 temperature of 138C according to ISO 306. NORYL™ NH5110E resin was developed for low-beard growth during profile extrusion and is an excellent candidate for electrical conduit and cable management applications.
Product families
Applications
- Pipes & Plumbing
- Circuit Breakers
- Conduits & Cable Management
- Connectors
- Housings & Enclosures
- Switches & Relays
Product Families
- Blends & Alloys
Other characteristics
- Brand
- NORYL™ Resin
- Density
- 1090.0 - 1090.0 kg/m³
- Polymer Name
- PPO/PS Alloy
- Flexural Modulus
- 2400.0 - 2400.0 MPa
- Processing Methods
- Extrusion, Profile Extrusion
- Note
ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.; ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.; ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
- Markets
- Building & Construction
- Electrical & Electronics
- Flame Rating
- UL 94 V1
- Technology
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- Additives Included
- Flame Retardant
- Heat Stabilizer
- Impact Modifier
- Material Features
- Amorphous
- Dimensional Stability
- Flame Retardant
- Good Extrusion Properties
- Heat Stabilized
- High Hydrolytic Stability
- Impact Modified
- Low Moisture Absorption
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Cable Management Systems
- Circuit Protection
- Conduit
- Connectors
- Electrical Components
- Electrical/Electronic Applications
- Electronic Components
- Enclosure
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Profile Extrusion
Technical data
Table 1 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress (Yield, 50 mm/min) ¹¹ | 64 | MPa | ISO 527 |
| Tensile Stress (Break, 50 mm/min) ¹¹ | 52 | MPa | ISO 527 |
| Tensile Strain (Yield, 50 mm/min) ¹¹ | 4 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) ¹¹ | 18 | % | ISO 527 |
| Tensile Modulus (at 1 mm/min) ¹¹ | 2500 | MPa | ISO 527 |
| Flexural Stress (Yield, at 2 mm/min) ¹¹ | 98 | MPa | ISO 178 |
| Flexural Modulus (at 2 mm/min) ¹¹ | 2400 | MPa | ISO 178 |
Table 2 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density ¹¹ | 1.09 | g/cm³ | ISO 1183 |
| Water Absorption (at 23°C, saturated) ¹¹ | 0.15 | % | ISO 62-1 |
| Moisture Absorption (at 23°C, 50% RH) ¹¹ | 0.06 | % | ISO 62 |
| Melt Volume Rate (at 280°C, 5.0 kg) ¹¹ | 9 | cm³/10 min | ISO 1133 |
Table 3 of 7
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ | 0.000082 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ | 0.000082 | 1/°C | ISO 11359-2 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹ | 0.000094 | 1/°C | ASTM E831 |
| Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹ | 0.000094 | 1/°C | ISO 11359-2 |
| Ball Pressure Test (at 123°C to 127°C) ¹¹ | Pass | — | IEC 60695-10-2 |
| Vicat Softening Temperature (Rate B/50) ¹¹ | 149 | °C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) ¹¹ | 138 | °C | ISO 306 |
| Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹ | 129 | °C | ISO 75/Be |
| Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ | 114 | °C | ISO 75/Af |
| Relative Temperature Index (Electrical) ᵖ ¹¹ | 65 | °C | UL 746B |
| Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 65 | °C | UL 746B |
| Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 65 | °C | UL 746B |
Table 4 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (1 MHz) ¹¹ | 2.6 | — | IEC 60250 |
| Relative Permittivity (1 MHz) ¹¹ | 2.6 | — | ASTM D150 |
| Dissipation Factor (at at 1 MHz) ¹¹ | 0.0017 | — | ASTM D150 |
| Dissipation Factor (at at 1 MHz) ¹¹ | 0.0017 | — | IEC 60250 |
| Dielectric Strength (shorttime, at 1mm) ¹¹ | 46 | kV/mm | IEC 60243-1 |
Table 5 of 7
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Adapter Temperature | 240 - 260 | °C |
| Barrel - Zone 1 Temperature | 220 - 240 | °C |
| Barrel - Zone 2 Temperature | 230 - 250 | °C |
| Barrel - Zone 3 Temperature | 240 - 260 | °C |
| Barrel - Zone 4 Temperature | 240 - 260 | °C |
| Calibrator Temperature | 50 - 70 | °C |
| Die Temperature | 240 - 260 | °C |
| Drying Temperature | 80 - 90 | °C |
| Drying Time | 2 - 3 | Hrs |
| Hopper Temperature | 40 - 60 | °C |
| Melt Temperature | 240 - 260 | °C |
Table 6 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ | 24 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) ¹¹ | 9 | kJ/m² | ISO 180/1A |
| Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 26 | kJ/m² | ISO 179/1eA |
| Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 11 | kJ/m² | ISO 179/1eA |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| UL Recognized (94V-1 Flame Class Rating) ʳ | 1.5 | mm | UL 94 |
| Oxygen Index (LOI) ʳ | 34 | % | ISO 4589 |
