DENSIPOL® TA 10
- CASE Ingredients Features
- Cost EffectiveHeat ResistanceHigh Gloss
- Chemical Family
- Polysiloxanes, SiliconesPolysiloxanesSilicones
DENSIPOL® TA 10 is a cost-effective antifoaming agent formulated based on modified organopolysiloxanes. This specialized antifoaming agent offers multiple benefits for various applications. It is highly effective, even in high shearing conditions, providing reliable foam generation control. DENSIPOL® TA 10 is designed to maintain excellent foam control over an extended period of time, ensuring consistent performance. Additionally, it is heat-resistant, capable of withstanding temperatures up to 80°C.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Defoamer
Product families
- Fluids & Lubricants
Other characteristics
- Brand
- DENSIPOL
- Functions
- Defoamer
- Compatible Polymers & Resins
Acrylics, Alkyds, Polyvinyl Acetate (PVA), Styrene Acrylics, Styrene-Butadiene Copolymer
- Odor
- Characteristic odor
- Carrier
- Water
- Markets
- Industrial
- Benefits
Effective in high shearing conditions.; Excellent foam generation control over long period of time.; Heat-resistant (until 80º C)
- Efficacy
Highly effective controlling the foaming generation process during manufacturing, handling and storage processes of paints and aqueous glues.. Tests according to most habitual use conditions show a remarkable decrease in the foam generation compared with untreated samples.
- Use Levels
- 0.2 - 0.6%
- Appearance
- White, opaque liquid
- Shelf LIfe
- 12 Months
- Use Dosages
As a general guidance, the most usual dosages vary between 0.2 and 0.6% for adhesives and paints and 0.3 and 1% for taladrines and cutting fluids.. Ideal dosage should be evaluated using case-by-case tests taking in account the specific application of the product.
- Coating Type
- Lacquers
- Insoluble In
- Water
- Technology
- CASE Ingredients
- Fluids & Lubricants
- Application Guidelines
When used for paints and coatings, add 2/3 of the product at the beginning of manufacturing process, and 1/3 just before adding the resin. Mix thoroughly until a correct distribution of the product is guaranteed.; In adhesives and taladrines, add the product as sooner as better during the manufacturing process. In cutting oils, add the product regularly into the buffer tank. The dosage will depend on the water and circuit fluid renewal.; In each installation, the experience will show which is the best dosing point. Mix the product before using it.
- Packaging Information
- 23kg - 190kg - 950kg.
- Adhesive & Sealant Type
- Waterborne Adhesive
- Applications Information
Appropriate for products based on different resin, such as acrylic-styrene, pure acrylic, alkydic, butadiene-styrene and polyvinyl acetate.. It can also be applied in the buffer tank of cutting oil cooling circuit, using dosages from 250ppm depending on the specific characteristics of the circuit.
- Fluids and Lubricants Type
- Metalworking Fluids
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Fluids and Lubricants End Use
- Cutting Oils
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| pH | 6.0 - 8.0 | — |
| Viscosity | 400 - 1200 | cPs |
