Hydamer™ HCMF
Hydamer™ HCMF is a flexible, homogeneous and non-cracking free film at low concentrations that allows styling without “dandruff effect” and gives natural flexible hold and elasticity without added heaviness. The protective film aids hair fibers to not dry out and become , thus split ends are dramatically reduced. Hair does not stick together and due to HCMF’s no build-up effect, it is easily washed out. HCMF has low sensitivity to atmospheric moisture which makes HCMF especially beneficial for all-weather styling products. It also helps to reduce electrostatic charge that causes the fly-away hair effect. HCMF has an extraordinary skin compatibility that promotes scalp care and it is readily biodegradable which makes it an environmentally- friendly ingredient.
Properties
- Physical Form
- Powder
- Solid
Other characteristics
- Brand
- Hydamer
- Functions
- Film Former, Hair Fixative
- Dosage Form
- Lotions, Spray
- Lotions
- Spray
- Labeling Claims
Antioxidants-free, Biodegradable, Environmentally Friendly, Natural, Preservative-free, Solvent-free, Ulta Beauty's Conscious Beauty; Antioxidants-free; Biodegradable; Environmentally Friendly; Natural; Preservative-free; Solvent-free; Ulta Beauty's Conscious Beauty
- Ingredient Origin
- Marine Origin, Natural Origin
- Certifications & Compliance
- ISO 9001, REACH Exempt (Europe)
- Odor
- Conforms to standard
- Usage
HYDAMER™ HCMF is a cationic film former of marine origin. It is suitable for use as a fixative polymer in styling products, such as mousses, setting lotions and pump sprays.. HYDAMER™ HCMF exhibits excellent repair effects on hair, and can be used in hair conditioning lotions to treat split ends.
- Markets
- Healthcare & Pharma
- Personal Care
- Benefits
Hydamer HCMF gives a protective layer so that hair does not stick together; Hydamer HCMF's protective crack-free film, makes hair fibers not drying out; Hydamer HCMF has a low sensitivity to atmospheric moisture and is easy to wash out
- Appearance
- off white to beige - almost odorless powder
- Shelf LIfe
- 4 Years
- Soluble In
- Acidic solution (at pH 4 to 5)
- Insoluble In
- Water
- Technology
- Cosmetic Ingredients
- Pharmaceuticals & Nutraceuticals
- Benefit Claims
- Anti-Dandruff
- Compatibility
- Curl Retention
- Ease of Styling
- Film Forming
- Hair Conditioning
- Hair Protection
- Hair Repair
- Usage Procedure
In order to obtain a clear, aqueous solution, small amounts of acids must be added, e.g. for a 1% solution about 0.4 – 0.6% of acid is needed. It is recommended to only use glycolic, benzoic, acetic or lactic acid, but citric and tartaric acid is not suitable to use.; It is suggested to produce the solution at room temperature by using the following procedure: add water to HYDAMER™ HCMF and stir it briefly to obtain a dispersion. Then the acid solution (e.g. pre-dissolved glycolic acid in a small amount of water) should be added gradually. Stir the mixture gently until it becomes a clear solution (within 30-60 min). The pH of the resulting solution must be adjusted to pH 4 to 5. The final formulation pH must be less than 6.0.; Depending on the intended application, it is recommended to filter the solution before it is incorporated into the formulation. HYDAMER™ HCMF is not compatible with anionic compounds. It is limited compatible with isopropanol (e.g. a 2% solution of HYDAMER™ HCMF with a maximum of 40% isopropanol) and with more than 60% ethanol (with a-hydroxy-isobutyric acid: compatible up to 80% ethanol).; HYDAMER™ HCMF is not suitable for use in alkaline formulations such as deo-sticks. The application concentration should be in the range from 0.05 to 0.15% AS.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Substance | min. 95 | % | NMKL23 |
| Total Nitrogen | 7.5 - 9 | % | NMKL6/Fosstec (Kjeldahl) |
| Ash Content | max. 0.5 | % | ISO 5984 - 550o C |
| Viscosity (RV2, 20⁰C, 20 rpm; 1% in 0.4% Glycolic Acid) | 50 - 150 | mPas | ISO 2555 |
| Deacetylation Degree | min. 75 | % | — |
| Molecular Weight | 50,000 - 1,000,000 | g/mol | — |
