Metalcrete Industries COLOR-ROK FLOORING
- Chemical Family
- Epoxy & Epoxy Derivatives
Metalcrete Industries COLOR-ROK FLOORING is an epoxy coating and colored silica quartz system used to decorate and protect most substrates including concrete, stone, wood, and metal. The Color-Rok Flooring system produces a seamless, slip-resistant surface while offering protection from abrasion and chemical attack. Use on any floor, walkway, or ramp where safety precautions against slippery conditions are important and sanitary cleaning is mandatory.
Product families
Applications
- Fence Decks & Rails
- Floor Coatings
Product Families
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Acid Resistant, Anti-Slip, Chemical Resistant, Low VOC
- Product Type
- Epoxy Coating, Solventless & High Solids Coating
- Epoxy Coating
- Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Concrete, Metal, Stone, Wood
- Markets
- Building & Construction
- PACKAGING
Color-Rok Flooring is supplied in units, each containing the proper proportions of clear liquid components for the Base Coat and Top Coat, plus colored quartz granules.. Equal amounts of both components for Base Coat and Top Coat make up the total unit size.
- Limitations
Color-Rok Flooring should not be applied outside with an epoxy system, exposed to steel wheel traffic, or temperatures above 150°F (65°C). Do not apply at substrate temperatures below 50°F (10°C).
- Availability
Color-Rok Flooring is normally available from your local distributor or will be shipped within 5 working days upon receipt of order. Custom colors may take up to 8 working days before shipping. Metalcrete Industries recommends that material samples be requested before final order is placed.
- Technology
- Ready-to-Use Products
- Color and Appearance
Color-Rok Flooring is available in 16 standard solid colors. Factory pre-mixed color combinations are also available in standard patterns or custom blends can be prepared in any proportion.
- Benefits and Features
Quartz aggregate is available in 16 standard colors, providing for slip-resistant wall to wall safety.; 100% solids epoxy allows for total compliance with VOC regulations.; Easy-to-use three step installation method permits rapid return to service and exposure to traffic within two days.; Dense surface coupled with an available antimicrobial additive will resist mildew and bacteria growth and allow for easy cleaning and maintenance.; Contains no volatile solvents, permitting interior applications with virtually no fire hazard or toxic odor.; Can be used with MMA for exterior applications.; Easy clean-up with soap and water.
- Chemical Resistance
- Most Acids - Unaffected
- Acetone - Not Recommended
- Calcium Chloride - Unaffected
- Detergent Solutions - Unaffected
- Animal Fats - Unaffected
- Blood - Unaffected
- Gasoline - Unaffected
- Petroleum Oil - Unaffected
- Estimating and Coverage
The recommended maximum coverage rate over a smooth surface is shown below:; 150 sq. ft. (13.9 sq. m); 1,500 sq. ft. (139.4 sq. m)
- Typical Applications
- Pool decks
- Restrooms and locker rooms
- Office lobbies
- Laundry rooms
- Meat processing facilities
- Corridors of schools or hospitals
- Cafeterias
- Kitchens
- Ready to Use Product Features
- Abrasion Resistant
- Acid Resistant
- Anti-Slip
- Chemical Resistant
- Low VOC
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Stone
- Wood
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion | 420.0 | psi | — |
| Flexural Strength | 11700.0 | psi | ASTM D790 |
| Compressive Strength | 13600.0 | psi | ASTM D695 |
| Tensile Strength | 7900.0 | psi | ASTM D638 |
