Diamite AGC
- Chemical Family
- Epoxy & Epoxy Derivatives
Diamite AGC is a water-based epoxy coating intended to protect a wide range of substrates from graffiti abuse. Diamite AGC is resistant to spray paint, ink, crayons and harsh chemicals and may be applied to virtually any sound, clean and dry surface. Diamite AGC provides a smooth, attractive and easy-toclean surface.
Product families
- Protective Coatings
Other characteristics
- Brand
- Diamite
- Features
Abrasion Resistant, Chemical Resistant, Easy To Modify, Medium Gloss, Microbe Resistant, Mildew Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Waterborne Coating
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Brick, Concrete, Wood
- PACKAGING
Diamite AGC is supplied in two standard units, each containing the proper proportions of liquid components. The mixing ratio is approximately 4 to 1 by volume. Standard packaging information is shown below:
- Composition
Diamite AGC is a water-based, two component epoxy coating having the viscosity of conventional paint.
- Limitations
Do not apply when substrate and ambient temperatures are less than 50°F (10°C). Concrete must be 28 days old before coating.
- Availability
Diamite AGC is normally available immediately from your local distributor or it will be shipped within 5 working days upon receipt of order. Custom colors may take up to 8 working days before shipping.
- Technology
- Ready-to-Use Products
- Color and Appearance
Diamite AGC is available in a wide range of standard colors including; black, blue, light blue, brown, dark brown, light brown, medium gray, charcoal gray, concrete-tone gray, dark gray, green, light reflective, red, safety yellow, white, and clear. Custom colors are available at additional cost when quantities exceed 100 gals. (379 liters).
- Benefits and Features
Excellent bonding properties permit application to most sound surfaces with incredible adhesionincluding drywall, wood, concrete, brick, and other surfaces; Water-based technology permits interior applications with no toxic odors or fire hazard; Repels substances normally employed in graffiti abuse; Dense surface resists mildew and bacteria; Abrasion-resistant coating outwears conventional paints by approximately 5 to 1; Available in many standard colors to provide a decorative semi-gloss surface; Dries to touch within 4 hours after application at 70°F (21°C); Unaffected by exposure to low temperatures after final curing; Consists of a water-based epoxy system to allow total compliance with VOC regulations; Bonds to itself, allowing for multiple coats; Has the viscosity of conventional paint permitting application on horizontal and vertical surfaces with a brush or roller; Resistant to harsh cleaning chemicals and scouring cleansers
- Application Methods
- Brush
- Roller
- Estimating and Coverage
The recommended coverage rate for Diamite AGC is 250-350 sq. ft./gal. (6.1-8.6 sq. m./liter). One coat applied at 250 sq. ft./gal. (6.1 sq. m./liter) will produce a 3 mil (0.08 mm) dry film thickness. For best results, use two coats.
- Typical Applications
- Schools
- Penitentiaries
- Subway and Bus terminals
- Restrooms
- Retaining walls
- Highway overpasses
- Universities
- Hallways and corridors.
- Ready to Use Product Features
- Abrasion Resistant
- Chemical Resistant
- Easy To Modify
- Medium Gloss
- Microbe Resistant
- Mildew Resistant
