BECKOPOX™ VEP 2381W/55WA
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Epoxy & Epoxy Derivatives
BECKOPOX™ VEP 2381W/55WA, a member of the CASE Ingredients resin and binders family, serves as a binder and resin within the epoxy and epoxy derivatives category. It stands out for its VOC-free composition, making it environmentally compliant. Tailored for industrial applications, especially in the realm of furniture and metal coatings, this formulation is available in both dispersion and liquid forms, including options for epoxy and waterborne coatings.
Properties
- Physical Form
- Dispersion
- Liquid
Product families
Applications
- Furniture Coatings
- Industrial Coatings
- Metal Coatings
Product Families
- Epoxies
Other characteristics
- Brand
- BECKOPOX
- End Uses
- Epoxy Coating, Waterborne Coating
- Compatible Substrates & Surfaces
- Metal
- Markets
- Paints & Coatings
- Coating Type
- Epoxy Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- VOC-free
- Country Availability
- China (Mainland)
- Storage and Handling
At temperatures up to 25°C storage stability packed in original containers amounts to at least 180 days. It is important to protect BECKOPOX™ VEP 2381w from frost und direct sunlight; at low temperatures it has to be stored under frostproof conditions. The viscosity of BECKOPOX™ VEP 2381w might decrease during storage. The product tends to form a tiny skin on the surface. It is therefore recommended to filter BECKOPOX™ VEP 2381w prior to use.; Lowest storage temperature: 5°C; When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.
- Distinguishing Features
BECKOPOX™ VEP 2381w is similar in structure to BECKOPOX™ EP 384w but has due to its reduced solvent content a much shorter potlife.
- Special Properties and Uses
BECKOPOX™ VEP 2381w is a solid type 1 epoxy resin as aqueous dispersion. When cured with suitable curing agents such as BECKOPOX™ EH 623w or EH 659w fast drying coating systems for mineral and metallic substrates can be formulated.
- Compatible Polymers and Resins
- Epoxies (EP)
- Compatible Substrates and Surfaces
- Metal
- Suggested Uses and Processing Information
MIXING RATIO AND POTLIFE. A blend of 100,0g BECKOPOX™ VEP 2381w/55WA 22,2g BECKOPOX™ EH 623w/80WA 22,2g deionized water has a potlife of approx. 40 minutes at 23°C. The termination point cannot be observed by viscosity increase or gelation so that is recommended to use the formulated mix within the stated time limit.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (20°C) | approx. 1.08 | g/cm³ |
| Flash Point (Pensky-Martens) | min. 100 | °C |
| Dynamic Viscosity (10 s⁻¹ , 23°C) | 3500 - 12000 | mPa.s |
| Epoxy Equivalent (Solids) | 470 - 530 | g/mol |
| Epoxy Equivalent (Form of Delivery) | 850 - 960 | g/mol |
| Non-Volatile Matter (1h, 125°C, 1g) | 53 - 57 | % |
