BECKOPOX™ VEH 2849W/80WA
- CASE Ingredients Features
- Corrosion ResistanceImproved Water Immersion
- Chemical Family
- Amines, PolyaminesAminesPolyamines
BECKOPOX™ VEH 2849W/80WA serves as an amine-based hardening agent by CASE Ingredients. This VOC-free product provides corrosion resistance and enhanced water immersion properties. It finds applications in building and construction coatings, including decorative paints, EIFS and insulation, and various industrial metal coatings.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Hardener
Product families
Applications
- Decorative Paints
- EIFS & Insulation
- Decorative Paints Coatings & Stains
- Industrial Coatings
- Metal Coatings
Product Families
- Functional Additives
Other characteristics
- Brand
- BECKOPOX
- End Uses
- Waterborne Coating
- Features
- Corrosion Resistance, Improved Water Immersion
- Functions
- Hardener
- Labeling Claims
- VOC-free
- Markets
- Building & Construction
- Paints & Coatings
- Shelf LIfe
- 1 Year
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Storage and Handling
At temperatures up to 25°C storage stability packed in original containers amounts to at least 365 days. Synthetic resins containing water may freeze or get inhomogeneous at temperatues below 0°C. By this the product will not suffer any damage, but the necessary regeneration requires extended heat treatment at 40-50°C with continuous stirring. It is therefore recommended to ensure frostproof storage of such products.; Lowest storage temperature: - 15°C; When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.
- Distinguishing Features
BECKOPOX™ VEH 2849w shows the same reactivity as BECKOPOX™ EH 613w and is especially suited for coatings on metallic substrates together with BECKOPOX™ EP 385w. BECKOPOX™ VEH 2849w shows improved stability of aqueous dilutions and better temperature stability during the dispersing process.
- Special Properties and Uses
BECKOPOX™ VEH 2849w is used together with solid epoxy resin dispersions or emulsified liquid resins.; When used with BECKOPOX™ EP 385w coating systems for metallic substrates can be formulated with excellent water and saltspray resistance. The use of 80% of the stoichiometric curing agent quantity has given best results. At room temperature the film cures rapidly and can also be forced dried at elevated temperatures.; When using solid epoxy resin dispersions, pigment dispersion is mostly carried out in the curing agent component. When reducing with water it should be ensured that the concentration is not lower than 20%. It is also important that the mill base temperature does not exceed 50°C.
- Compatible Substrates and Surfaces
- Metal
- Suggested Uses and Processing Information
MIXING RATIO AND POT LIFE. A blend of 100g BECKOPOX™ EP 385w/56WA 15g BECKOPOX™ VEH 2849w/80WA 15g deionized water has a processing time at 23°C of approx. 90 minutes. The termination point cannot be visually seen through viscosity increase or gelation. Therefore it is necessary to use the material within the stated time limit.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Iodine Color Number | max. 10 | — |
| H-Equivalent Weight (Solid Matter) | 107 | g/mol |
| Density (20°C) | approx. 1.09 | g/cm³ |
| H-Equivalent Weight (Form of Delivery) | 134 | g/mol |
| Flash Point (Pensky-Martens) | min. 100 | °C |
| Dynamic Viscosity (25 s⁻¹, 23°C) | 18000 - 25000 | mPa.s |
| Dynamic Viscosity (25 s⁻¹, 25°C) | 15000 - 20000 | mPa.s |
| Amine Value (Reaction Resins) | 240 - 270 | mg KOH/g |
