BECKOPOX™ EP 2350W/60WA
- CASE Ingredients Features
- Improved Chemical Resistance
- Chemical Family
- Epoxy & Epoxy Derivatives
BECKOPOX™ EP 2350W/60WA is a dispersion binder and resin in the epoxy and epoxy derivatives family, developed by CASE Ingredients. Highlighted as VOC-free, this product is recognized for its enhanced chemical resistance. Targeting the paints and coatings market, its applications encompass industrial coatings, furniture coatings, and metal coatings. Specifically designed for compatibility with epoxies, it is available in both epoxy and waterborne coating forms, making it ideal for application on metal substrates.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Furniture Coatings
- Industrial Coatings
- Metal Coatings
Product Families
- Epoxies
Other characteristics
- Brand
- BECKOPOX
- End Uses
- Epoxy Coating, Waterborne Coating
- Features
- Improved Chemical Resistance
- Compatible Substrates & Surfaces
- Metal
- Markets
- Paints & Coatings
- Shelf LIfe
- 180 Days
- Coating Type
- Epoxy Coating
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- VOC-free
- Country Availability
- China (Mainland)
- Storage and Handling
At temperatures up to 25°C storage stability packed in original containers amounts to at least 180 days. It is important to protect BECKOPOX™ EP 2350w/60WA from frost; at low temperatures it has therefore to be stored under frostproof conditions.. When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.
- Distinguishing Features
In comparison to BECKOPOX™ EP 384w chemical resistance of BECKOPOX™ EP 2350w is higher, penetration into porous substrates is better and drying is slower.
- Special Properties and Uses
BECKOPOX™ EP 2350w/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. In combination with suitable amine hardeners such as BECKOPOX™ EH 613w or BECKOPOX™ EH 623w fast drying coatings for metallic and mineral substrates can be formulated. BECKOPOX™ EP 2350w is not shear stable. Grinding of pigments and fillers shall be done in the hardener.
- Compatible Polymers and Resins
- Epoxies (EP)
- Compatible Substrates and Surfaces
- Metal
- Suggested Uses and Processing Information
MIXING RATIO AND POT LIFE. A blend of 100.0g BECKOPOX™ EP 2350w/60WA, 25.0g BECKOPOX™ EH 613w/80WA 30.0g deionized water has a processing time at 23°C of approx. 60 min. The end of processing time can not be seen by an increase of viscosity or gelation. Therefore it is necessary to use the material within the stated time limit. The substrate temperature should not be below 12°C and the relative humidity not above 80%.
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (CCCFP) | min. 94 | °C |
| Density (20°C) | approx. 1.11 | g/cm³ |
| Dynamic Viscosity (100 s⁻¹, 23°C) | 1000 - 9000 | mPa.s |
| Epoxy Equivalent (Solids) | 300 - 400 | g/mol |
| Epoxy Equivalent (Form of Delivery) | 520 - 640 | g/mol |
| Non-Volatile Matter Analogue (1h, 160°C, 1g) | 58 - 62 | % |
