Arboritec™ UVelite Uv-cured 1-component Waterborne Lacquer
Arboritec™ UVelite Uv-cured 1-component Waterborne Lacquer is a single-component, UV-curable, waterborne finish for wood and parquet floors. Designed for areas of heavy traffic. The durability is higher than most other conventional two-pack water borne PU finishes. UVElite is exceptionally durable to scratches, heel marks and ordinary household chemicals. The finish is fortified with ceramics thanks to our unique Small Particles Technology. Adding ceramic particles to product results 30% less petro- chemical raw materials used hence makes UV Elite up to 30% more environmentally friendly than competitive brand lacquers. UV Elite has passed very strict air quality tests and regulations and it makes UV Elite one of the most environmentally responsible finishes available.
Product families
Applications
- Primers & Lacquers
Product Families
- Lacquers
Other characteristics
- Brand
- Arboritec
- Features
Detergent Resistant, Durable, Good Adhesion, Good Scratch Resistance, Grease Resistant, High Capacity of Penetration, High Flow, High Strength, Low Odor, Low VOC, UV Curable, Water Resistant, Water-based
- Product Type
1K (1 component) Coating, Lacquers, Waterborne Coating; 1K (1 component) Coating; Lacquers; Waterborne Coating
- Compatible Substrates & Surfaces
- Wood
- Odor
- Very Light, Non Offending
- Color
- White
- Safety
- Non-hazardous
- Markets
- Printing & Packaging
- Disposal
Never pour surplus finish down the drains. Dispose it in accordance to local regulations
- Storaging
1 year from date of manufacture in unopened original container at 41°F (5°C) to 77°F (25°C); Keep from freezing
- Application
Application of the finish should be carried out along the direction of parquet strips and wood. If possible, do not apply the finish cross the direction of daylight. Windows/doors must be closed to prevent air flow and ventilation should be shut down for the time of application. If possible prevent direct sunshine on the floor during coating. UVElite is suitable for application with a lightweight t-bar applicator, roller or brush. For best results apply one coat of Arboritec primer, let it dry. Sand the floor with a 120 grit screen to remove grain raise. Always test the product on a smaller area to ensure color and adhesion. For best results on bare, unstained wood floor, always use UV Elite finish with Arboritec primers: First Coat or Vibrant, following label instructions. Apply the first coat of UV Elite 80-105g/ m² and leave to dry for 1-3 hours. Apply a second coat and leave to dry for a further 1-3 hours or more depending on drying conditions. It is important that the surface relative humidity is under 8%, or the same as its original value, to guarantee optimal curing conditions. CURING WITH UV: Use a portable UV unit at a run speed of 6-10 meters per minute, with lamp width between 20 and 40 cm. Make sure you overlap to ensure that the whole surface is cured. The floor can be used immediately after curing. If you have any questions, do not hesitate to contact the floor supplier or Arboritec.
- Cure
- Radiation Cure
- Maintanance
To keep the floor looking its best, clean and maintain floor using Aboritec "Cleaner Spray"and "Refresher", following application instructions. Do not clean the floor before it is fully cured
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- NMP-free
- Non-Hazardous
- Cleaning of Tools
Thoroughly clean all application tools with water, right after using
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit |
|---|---|---|
| VOC (US) | max. 21 | g/L |
| VOC (EU) | 0.0 | g/L |
| Solids by Volume | 32.0 | % |
| pH | approx. 8 | — |
| Weight | approx. 8.76 | lbs./gallon |
| Density | approx.. 1.05 | Kg/l |
| Coverage (T Bar) | 500 - 600 | sq. ft./Gallon |
| Coverage (Roller) | 10 - 13 | m² |
| Drying Time (20°C, RH 50%) | 1 - 3 | h |
| Full Cure | 7.0 | Days |
| Flow & Leveling | Exceptional | — |
