Arboritec™ Vibrant Deep Ambering Sealer
Arboritec™ Vibrant Deep Ambering Sealer is a deep-ambering ceramic fortified primer for indoor wood and parquet floors. Vibrant ambers and deepens the darker tones and colors in the grain of the wood. Vibrant primer is fortified with ceramics thanks to our unique Small Particles Technology. Ceramic particles make Vibrant up to 30% more environmentally friendly than competitive branded lacquers. Vibrant is NMP free and has low solvent content. Vibrant dries fast, reduces the side bonding effect and the fiber rising. It gives the floor a smooth and rich surface .Ideally, use Arboritec Avenue or Genuine directly over satin; if you choose to use Vibrant, be sure that the stain is ready for a coat of waterborne sealer. For indoor use only.
Product families
- Primers & Sealers
Other characteristics
- Brand
- Arboritec
- Features
Durable, Good Adhesion, Good Scratch Resistance, High Capacity of Penetration, High Strength, Low Odor, Low VOC, Water Resistant
- Product Type
- Primer, Sealer
- Primer
- Sealer
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Wood
- Color
- Amber
- Safety
- Non-hazardous
- Markets
- Building & Construction
- Printing & Packaging
- Disposal
Never pour surplus finish down the drains. Dispose it in accordance to local regulations
- Storaging
1 year from date of manufacture in unopened original container at 41°F (5°C) to 77°F (25°C); Keep from freezing
- Application
Application of the primer should be carried out along the direction of parquet strips and wood. If possible, do not apply the primer cross the direction of daylight. Windows/doors must be closed to prevent air flow and ventilation should be shut down for the time of application. If possible prevent direct sunshine on the floor during coating. Vibrant is suitable for application with a lightweight t-bar applicator, roller or brush. Always test the product on a smaller area to ensure color and adhesion. Apply Vibrant with a t-bar applicator in one layer at the rate of 400-500 sq. ft. per gallon. Do not use the same applicator to apply both sealer and finish. Avoid applying in direct sunlight. Make sure that Vibrant is completely dry before applying the first coat of Arboritec finish. If it is necessary to abrade Vibrant, start with a maroon pad with 1-2 150-grit sanding strips, or a 150-grit or finer sanding disk or screen. If the first top coat is applied over Vibrant within 48 hours, there is no need to abrade for adhesion. It is always recommended to use Arboritec finishes with Arboritec Vibrant.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- NMP-free
- Non-Hazardous
- Cleaning of Tools
Thoroughly clean all application tools with water, right after using
- Application Methods
- Brush
- Roller
- Chemical Resistance
Resistant to grease, water and ordinary household cleaners and detergents
- Ready to Use Product Features
- Durable
- Good Adhesion
- Good Scratch Resistance
- High Capacity of Penetration
- High Strength
- Low Odor
- Low VOC
- Water Resistant
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| VOC (US) | max. 75 | g/L |
| VOC (EU) | 96.0 | g/L |
| Solids by Volume | 32.0 | % |
| pH | approx. 8 | — |
| Odour | Very Light, Non Offending | — |
| Coverage (T Bar) | 400 - 500 | sq. ft./Gallon |
| Coverage (Roller) | 8 - 11 | m² |
| Drying Time (20°C, RH 50%) | 40 - 60 | min |
