SR3604-28A Polyamide-Imide Resin Solution
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceThermal Resistance
- Chemical Name
- 1-ethylpyrrolidin-2-one, Triethylamine
- Chemical Family
- Aromatics, Polyamide-imidesAromaticsPolyamide-imides
SR3604-28A is an aqueous version of the SR3604 (NEP solvent) series of aromatic polyamide-imide resins, enabling further dilutions with water.This product is produced at our plant in Dayton, TN.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Consumer Goods — Housewares
- Electronics Coatings
- Electronics Coatings
Product Families
- Other Resins & Binders
Other characteristics
- Features
Abrasion Resistance, Chemical Resistance, Thermal Resistance
- Compatible Substrates & Surfaces
- Composites
- Markets
- Consumer Goods
- Electrical & Electronics
- Paints & Coatings
- Storage
In the original sealed container these products have a shelf life of 18 months when stored below 35°C. Solution viscosity will increase over time. The rate of increase depends upon solvent, % solids and storage conditions. The increase in viscosity does not effect polymer performance. The viscosity can be adjusted with water or additional solvent and the material can be used with no performance loss.
- Appearance
- Viscous Red / Brown Liquid
- Processing
SR3604-28A is supplied as a solution; care must be taken to enable the solvent to be removed slowly to avoid blistering of the film. During curing, the temperature of the object should be increased slowly up to the final cure temperature to avoid blistering of the coating due to final release of solvent. Final cure temperature of >220°C is required.. It is advised not to mix used material with unused product for storage, although topping-off the process tank with fresh material is acceptable.
- Shelf LIfe
- 18 months
- Technology
- CASE Ingredients
- Dilution
- Use de-mineralized or distilled water.
- HIGHLIGHTS
Coatings produced from SR3604-28A provide:; Excellent thermal stability (polymer will typically withstand temperature excursions up to 240ºC).; High level of chemical resistance.; Good abrasion resistance.; FDA compliance.
- Chemical Inventories
- DSL (Canada)
- EINECS (EU)
- ELINCS (EU)
- IECSC (China)
- NDSL (Canada)
- PICCS (Phillipines)
- TSCA (USA)
- Regulatory Information
Specific local inquiries should be directed to Cymer-Dayton, LLC. To the best of our knowledge this product meets the definition of a polymer under REACH, and its components are registered as substances. The material, or components, is either on the TSCA inventory list or is exempt from the requirement to be listed.
- Certifications and Compliance
- FDA Compliant
- Compatible Substrates and Surfaces
- Composites
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (23°C) | 5000 - 7000 | mPas |
| Non - Volatiles | 27 - 29 | % |
| Density (23°C) | 1.05 | g/mL |
| pH Value | 9 - 10 | — |
