SR3602-28 Polyamide-Imide Resin Solution
- CASE Ingredients Features
- Abrasion ResistanceChemical ResistanceThermal Resistance
- Chemical Name
- 1-Methyl-2-pyrrolidinone, Triethylamine
- Chemical Family
- Aromatics, Polyamide-imidesAromaticsPolyamide-imides
SR3602-28 is an aqueous version of the 3602 series (NMP solvent) of aromatic polyamide-imide resins, enabling further dilutions with water.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Adhesion PromoterBinder & Resin
Other characteristics
- Functions
Adhesion Promoter, Binder & Resin, Resins, Binders & Matrix Materials
- Compatible Substrates & Surfaces
- Composites
- Color
- Brown
- Markets
- Consumer Goods
- Electrical & Electronics
- Paints & Coatings
- Storage
In the original sealed container these products have a shelf life of 18 months when stored below 35°C.; Solution viscosity may change over time from the value reported on COA.; The rate of change depends upon solvent, % solids and storage conditions.; The change in viscosity does not affect polymer performance and the material can be used with no performance loss.
- Appearance
- Viscous clear red/brown liquid
- Processing
SR3602-28 is supplied as a solution, care must be taken to enable the solvent to be removed slowly to avoid blistering of the film.; During curing, the temperature of the object should be increased slowly up to the final cure temperature to avoid blistering of the coating due to final release of solvent.; Final cure temperature of >220°C is required.; It is advised not to mix used material with unused product for storage, although topping-off the process tank with fresh material is acceptable.
- Shelf LIfe
- 18 months
- Technology
- CASE Ingredients
- Composite Materials
- Material Features
- Abrasion Resistant
- Chemical Resistant
- Good Thermal Stability
- Temperature Resistance
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- EINECS (EU)
- ELINCS (EU)
- IECSC (China)
- KECI (Korea)
- NDSL (Canada)
- PICCS (Phillipines)
- Regulatory Information
This product meets the definition of a polymer under REACH, and its components are registered as substances.. The material, or components, is either on the TSCA inventory list or is exempt from the requirement to be listed.
- Certifications and Compliance
- FDA 21 CFR 177.2450
- FDA Compliant
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (25°C) | 5000 - 7500 | mPas |
| Non-Volatiles | 27 - 29 | % |
| Density (23°C) | approx. 1.05 | g/mL |
| pH | 9 - 10 | — |
