SETAQUA® DTM 6850
- CASE Ingredients Features
- Corrosion ResistanceHigh GlossImproved Mechanical ResistanceImproved Water ImmersionWater Resistance
- Chemical Family
- Acrylics & Acrylates
SETAQUA® DTM 6850. With outstanding qualities like increased flexibility and hardness, this aqueous coating is perfect for use in primer, top coat, and powder coating formulations. SETAQUA® DTM 6850, which was developed especially for architectural coatings, guarantees excellent gloss and improved water resistance, offering the best possible corrosion protection. This opaque coating offers enhanced mechanical resistance and is specifically designed to work with metal substrates.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Acrylics
Other characteristics
- Brand
- SETAQUA
- End Uses
- Waterborne Coating
- Features
Corrosion Resistance, High Gloss, Improved Mechanical Resistance, Improved Water Immersion, Water Resistance
- Compatible Substrates & Surfaces
- Metal
- Markets
- Building & Construction
- Paints & Coatings
- Appearance
- Opaque
- Shelf LIfe
- 365 Days
- Coating Type
- Waterborne Coating
- Technology
- CASE Ingredients
- Compatibility
In general SETAQUA® DTM 6850 has good compatibility with other anionic and non-ionic WB binders but performance and stability needs to be tested very carefully, especially with respect to corrosion resistance.. SETAQUA® DTM 6850 is compatible with a wide range of anticorrosion pigments but stability in the final formulation needs to be tested very carefully.
- Labeling Claims
- APEO-Free
- Storage and Handling
At temperatures up to 40°C storage stability packed in original containers amounts to at least 365 days.. It is important to protect SETAQUA® DTM 6850 from freezing; at low temperatures it should be stored under "keep from freezing" conditions.
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point (CCCFP) | min. 94 | °C |
| Density (20°C) | approx. 1.03 | g/cm³ |
| Dynamic Viscosity (100 s⁻¹; 23°C) | 10 - 300 | mPa.s |
| Non-Volatile Matter (150°C; 5 Min) | 41,5 - 44,5 | % |
| Minimum Film Forming Temperature | 37 | °C |
| pH Value (10%) | 7,6 - 8,8 | — |
